Instructions / Assembly

SLIDING SCREEN DOOR
INSTALLATION GUIDE
One Better Way | Georgetown, SC 29440 | 800.768.7325
ScreenTight.com
Measure Opening Height & Width
It’s extremely important to accurately measure
your existing door opening at multiple points.
Be sure to measure from inside the track. Use
the guide below to note your dimensions.
Use a level to note height changes as well.
Conrm the orientation of the door.
The handle should be lockable from the inside only and
the handle to open the door should be on the same sides
as the glass door. You can simply ip the door for a left
or right side opening.
Insert Door & Adjust to Fit
Slide the door in the top track rst and then insert the
bottom. Adjust the brass rollers on the bottom rst
through the side of the channel with a Philips head
screwdriver on each side of the door. Repeat this
adjustment on each of the screws to increase the
height and engage the door into the track.
Attach Latch & Handle
Lift the lock handle on the door
to the up position. Place the latch
lock plate in alignment with the
door latch and attach with two
small Philips head screws.
If you have the right sized door for
your opening, installing a replacement
sliding screen door is quick and easy.
1
2
3
4
A B C
D
30” doors t 5’ openings
36” doors t 6’ openings
This door is adjustable to t
77 3/8” to 78 1/2” door heights
T
ape Measure Safety Goggles
Level
Phillips Head
Screwdriver
TOOLS & SUPPLIES
If you need to extend the height
of your door please email us at
[e-mail]
and we can help.
EXTENDED HEIGHT
!