NE1217 52” Ladder with Safety Barrier and Removable Outside Steps Installation Instructions Inside Pool – Barrier against wall. Outside Pool – Safety Steps in place. Page 1 of 8 – Blue Wave Products – NE1217 20160525B Outside Pool – Safety Steps REMOVED.
Blue Wave NE1217 Pool Ladder with Barrier Parts List Item No. Part No. Qty.
Important: Read these Assembly and Use instructions carefully. Do not use the ladder for any other purpose - it is only for use with an above ground pool. Maximum authorized weight: 330lbs (150 kg.) To help prevent unauthorized entry to the pool, remove the Safety Steps when not in use (see cover illustrations). Check the condition of the ladder components before assembly, before and during each use.
ASSEMBLY DETAILS Refer back to these during assembly, as instructed. ASSEMBLY DETAIL A – Detail Diagrams of Step/Platform installation ASSEMBLY DETAIL B – Detail Diagrams of Bushing installation ASSEMBLY DETAIL C – Detail Diagram of Bridge Handrail assembly.
Step 1: Install the Inside Steps Follow ASSEMBLY DETAIL A to install the first step through the fourth step of inner ladder. Note: The end with the White Plug should face UPWARD. Step 2: Install the Removable Safety Steps ① ③ ② ④ Follow ASSEMBLY DETAIL A to install the Steps and then Follow ASSEMBLY DETAIL B to install two bushings on as shown in sub-steps ① through ④, above. For easier installation, remove the White Plugs first and when the bushings are installed, re-install the white plug.
Step 3: Assemble the Platform Follow ASSEMBLY DETAIL A to install the platform to the connection bridge. Step 4: Ladder Structure Assembly Inside Pool Step Outside Pool Step ① Lay the platform, inner ladder, and outside handrail on the ground. Follow the above illustration to connect handrails. Refer to ASSEMBLY DETAIL C for screw and washer order. After this step, the ladder should be in an “A” shape, as shown.
Inside Pool Step ③ Assemble the Barrier as shown. ④ Connect the Bottom Step and Barrier using screws, as shown. Inside Pool Steps ⑤ Stand the ladder up as shown, insert and connect the bottom steps, making sure to assemble the Inside and Outside bottom steps in the proper locations. Connect the Barrier to the Inside Tread as shown. Outside Pool Steps ⑥ Following ASSEMBLY DETAIL D, assemble the four (4) Safety Clips on the outside part of the ladder frame, as shown.
Step 5: Install Removable Safety Steps ① Insert the removable Safety Steps into the holes in the Bottom Outside Step. Tilt the Removable Safety Steps up, aligned with the Outside Rails. ② Clip the Removable Safety Steps into the Safety Clips as shown to finish the installation. Blue Wave Products, Inc. 1745 Wallace Ave St. Charles, IL 60174 TOLL-FREE CUSTOMER SUPPORT: (800) 759-0977 E- MAIL: INFO@BLUEWAVEPRODUCTS.COM MADE IN CHINA Copyright © 2016, Blue Wave Products, Inc.
