Use and Care Manual

MULTI SURFACE PROTECTION FILM
SPEC SHEET
PRODUCT
INFORMATION
Multi Surface Protection Film is a durable, self-adhering
protective film for hard surfaces such as tile, marble,
granite, vinyl, VCT, laminates and factory finished
hardwood. It’s not only great for floor protection, but can
be used to prevent damage to most counter tops, tubs,
sinks, doors and more. Multi Surface Protection Film is
ideal for remodeling, painting, moving, model home tours
and even parties.
5102.70
PRODUCT SPECIFICATIONS
Thickness 3.0 mil nominal
Film Low Density Polyethylene
Adhesive Type Formulated Acrylic
Adhesion Level 5-9 oz/in
Tensile Strength 3800 psi
Temperature (Ideal) 70° F
Humidity (Ideal) 50%
Elongation 470%
Chemical Name Acrylic PSA Tapes
Chemical Family Acrylic PSA Polyethylene Film
Chemical Formula Proprietary
Trade Name Multi Surface
Material Use Surface Protection
AVAILABLE SIZES
MU2450 Green 24” x 50’ 1 lb.
FS24200L Green 24” x 200’ 7 lbs.
FS24500 Green 24” x 500’ 17 lbs.
FS36250 Green 36” x 250’ 13 lbs.
FS36500 Green 36” x 500’ 26 lbs.
INSTRUCTIONS
Peel back edge of Multi Surface and begin to unroll. Press down edge at
beginning of area to be covered so Multi Surface adheres. Continue rolling
onto hard surface are applying pressure and smoothing down the film
while doing so. Carefully cut end with a sharp edge. When finished, fold
edge of the film back against the roll to use at a later time. Removal: roll
up Multi Surface and discard.
HANDLING AND STORAGE
Recommended for hard surfaces like VCT, laminate, and factory finished
hardwood floors. Store at room temperature and keep out of direct
sunlight exposure. If Multi Surface is stored in extreme conditions (over
95° F or below 40° F) allow product to return to room temperature prior to
use. Not recommended for hardwood floors that are not factory finished.
SAFETY
SDS for Surface Shields products available by request.
FEATURES
• Self-adhering film for hard surfaces
• Shields floors from dirt and moisture
• Protects tile, marble, granite, vinyl, laminates and factory
finished hardwood
• Can also prevent damage to tubs and counters
• Reduces clean up time and damage claims
APPLICATIONS
• Construction • Drywall
• Moving • Painting
• Remodeling • Parties
• Model Homes • Temporary Protection
The information in this document was obtained from sources which
we believe reliable. The information is provided without any warranty
expressed or implied regarding its correctness. We do not assume
responsibility for loss, damage or expense in any way connected with
the handling, storage, use or disposal of the product.
© 2015 Surface Shields, Inc. All rights reserved. Product names &
attributes trademark of Surface Shields, Inc. where applicable.
Liquid Shield
Recyclable