USER MANUAL M-DL7000
Contents Safety Precautions.....................................1-2 Android Auto................................................ 10 Installation procedure.................. 10-11-12 Play with Android..................................... 13 Map.......................................................... 13 Call out/ receive Call............................... 13 BAck to Android Auto............................. 13 Play music............................................... 13 Talk with Google...................
Safety Precautions Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you’ve finished reading the instructions, keep this manual in a safe place for future reference. Please don't change the fuse on the power cord without professional guidance, using improper fuse may cause damage to this unit or even cause fire. Only connect the unit to a 12-volt power supply with negative grounding.
Safety Precautions 1. Never disassemble or adjust the unit without any professional guidance. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the monitor. 3.
Product overview Front Panel 1 2 3 4 5 6 M-DL7000 Notice: The graphic in this manual is for reference only, and may be different from the actual unit. 1. [ ] button Activate Siri/Google voice control 2. [ ] button Short press: Switch on device In operation: Mute audio source Long press: Switch off device 3. [ ] button Call up main menu 4. [ ] button Show the volume bar 5. Reset Button: Press to reset system settings to factory default (except password and parental lock settings). 6.
Basic Operations Power On / Off Press the [ ] button on the unit to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD. Press and hold the [ ] knob to power off the unit. Volume Adjustment You can adjust the volume in steps from 0 (off) to 39 (maximum). Press the [ ] button and drag left/right on the volume bar to change the volume. Mute Briefly press the [ ] button to mute the device or to reactivate the previous volume.
Audio control Equalizer Menu The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Select Preset Equalizer 1. Enter the EQ setup mode Touch the [ ] icon in the user interface and the EQ setup interface will display on the screen. 2.
FM/AM Radio mode Radio overview 1 1. Touch to view the MENU and select a new playback source 2. Tune backward (short press) Seek backward (long press) 3. Current radio frequency 4. Tune forward (short press) Seek forward (long press) 5. Broadcaster information stored at the preset 6. Touch to change between AM/FM bands 7. Search stations automatically 8. To view all the stored stations 9. Enter frequency directly 10. Touch to view more on-screen buttons 11. Clock 12. RDS setting options 13.
FM/AM Radio mode Preset Station The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; the unit can store 30 stations in total. Search Stations Automatically Touch [ ] to search station and store 6 strongest stations in current band automatically. Manual Store 1. Tune to a station manually. 2. Touch [ ]. 3. Touch one of the channels P1 to P6 to save th selected station. Tune to a Preset Station 1. Touch [ ]. 2. Touch one of the preset channels on the screen.
FM/AM Radio mode RDS ( Radio Data System ) The unit provides basic functions of RDS. RDS service availability varies with areas. Please verify if RDS service is available in your area. AF Function Alternative Frequencies Lists are used in conjunction with the PI code (Program Identification code)to assist automatic tuning. Using this information, the radio can automatically search out another frequency of the same station. Note: • During auto switching radio frequency, some interference may be heard..
Car Play Using Apple lightning cable to connect iPhone with the product, and it will automatically show the CarPlay interface. User could directly operate the common functions of iPhone on the product. iPhone support: minimum iPhone6; Required iOS: minimum iOS 7.1. Play with CarPlay 1. Select the CarPlay source to play music. Play Music Touch the main interface of CarPlay mode to access all of your content from iTunes. Call Out / Receive Call 1 Touch the Phone of CarPlay mode for Calling.
Android Auto Connect Android phone by standard micro USB cable, drivers can enjoy the music from their phone, show the way with Google map or other map App and make or receive a call. User need to enable Bluetooth on phones and the product at the same time. Required Android OS: 5.0. (Android Auto App must be installed on the phone before connecting). Installation procedur The following procedure illustrated for the installation of Android Auto APP.
Android Auto Installation procedure To continue with the installation, you must agree to the terms provided by Google. Next step, are to allow Android Auto to easily work with navigation, music, calls messages and other voice commands. If you want these functions to Allow or Deny the functions.
Android Auto Next step, are to allow Android Auto to show your notifications on top of your other apps. Next step, Get started to Android Auto.
Android Auto Connect Android phone by standard micro USB cable, drivers can enjoy the music from their phone, show the way with Google map or other map App and make or receive a call. User need to enable Bluetooth on phones and the product at the same time. Required Android OS: 5.0. (Android Auto App must be installed on the phone before connecting). Play with Android Auto 1. Select the Andorid Auto source to play music. Map Touch the ( ) icon of Android Auto to let the phone show you the way.
Playback Mode Touch Screen Controls The touch key areas for playback are outlined below: A: Return to the main menu B: Display onscreen control menu C: Time display A B C B C Controlling Playback To access the on-screen controls, touch the screen except upper left corner, and touch again to cancel display. Touch [ ] to view all function icons. Connect a USB Device 1. Open the USB door. 2. Insert the USB socket, then connect the other end of the cable to your USB device. Remove a USB Device 1.
Playback Mode Search for a content For Folder Control 1. Touch [ ] to display all available folders 2. Touch a folder, then touch the desired file. 3. Touch the file again to start play For Audio Files 1. Touch [ ] to display all available audio folders. 2. Touch a folder,then touch the desired file. 3. Touch the file again to start play. For Video Files 1. Touch [ ] to display all available ideo folders. 2. Touch a folder,then touch the desired file. 3. Touch the file again to start play.
Bluetooth mode You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetooth-enabled device. Bluetooth device • In the main menu, press [Phone] the Bluetooth menu will be displayed. The list shows known Bluetooth devices. [ ] Add a new Bluetooth device. [ ] Displays the settings menu. • Press the [ ] key of the Bluetooth device with which you want to establish a connection.
Bluetooth mode Bluetooth function [ [ [ [ [ ] Call up the phone book. ] Call up records lists. ] Display the dial keypad menu. ] Disconnect connection with current device. ] Display options menu. Make a Call • Enter a phone number with the dial keypad and press the [ ] button. - Or • Select a contact/number via the records lists or phone book. The connection is being established. If a call is coming in, the call menu is displayed. [ ](Hang up): Reject a call. [ ](Answer): Answer a call.
Settings General 1. Touch [ General ] in the settings page. 2. Touch to highlight a setting. 3. Touch to display/select an option. General settings Options System Language Select on-screen display language. Lighting You can select the key color. Radio Area Select your region of origin. Beep Description On Turn on the beep sound. Each time you press a button, the unit beeps. Off Turn off the beep sound. SWC Steering wheeel control Screen Saver On/Off Turn on/off Screen Saver.
Settings System 1. Touch [ System ]. 2. Touch an option repeatedly to select: System settings Description MCU Update Update MCU MPEG Update Update MPEG MCU Version Display the current MCU version information. MPEG Version Display the current MPEG version information. Load factory Restore to default settings. Various Additional devices You can connect an external audio/video device to the unit. 1. Connect the external device with the supplied AV cable. 2.
Specifications General Reference Supply Voltage............................................................................................................12V Operating Voltage Range....................................................................................................... 9 - 16V Max Operating Current.....................................................................................................................15A Grounding System............................................................
Troubleshooting If the unit is faulty, please consult the following points before calling the service center. Problem Phenomena Solutions Cannot power on/off Check the connection, if it is broken, try to reconnect it; Check the main fuse, if it is damaged, replace it; Press reset key. No sound Adjust the volume. Confirm whether the music and video is supported or not. Reversing Abnormal picture Exit reversing mode and enter again. Check whether the camera is covered by foreign matters.
Wire Connections RADIO FM/AM Antenna USB LINE OUTPUT & AV IN MICROPHONE SWC & CAMERA IN CONNECTOR B CONNECTOR A USB-0.5A Video Out Camera IN Yellow Yellow PARKING Green with White Black Orange with white Brown with white Pink REVERSE P.CONT SWC1 Red SWC2 PIN NO.
- 23 -
Declaration of Conformity There are no restrictions of use. The manufacturer Aldinet S.p.A declares that the type of radio equipment - Multimedia Navigation Receiver, model M-DL7000, brand Macrom - complies with the 2014/53 / EU Directive. The full text of the EU Declaration of conformity is available at the following internet address: www.macrom.it, or at Aldinet S.p.A. Viale Colombo, 8 - 20090 Trezzano S/N (MI) Italy Made in China by Aldinet S.p.A.
The MACROM brand is a registered trade mark of ALDINET S.p.A. w w w . m a c r o m .