Instructions / Assembly

ManualsBrandsUnbranded ManualsBuilding materialsLiberator 8 in. x 5.875 in. Plastic Bathroom Fan Soffit Termination System in White

INSTALLATION GUIDELINES

These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to

check with your local building inspector or building permit office for approvals and possible variations that may apply.

CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.

When working with power tools and sheet metal, gloves and eye protection are absolutely required.

Provides a secure, professional finish for bathroom exhaust channeling through the soffit.

#LTS141

THE LIBERATOR BATHROOM FAN

SOFFIT TERMINATION SYSTEM

1 2

3 4

5 6

Snap body into bracket.

Encaje el cuerpo en el soporte.

Flexible

Rigid

Attach bracket cap. Install screws to lock body

Coloque la tapa del soporte. Instale los tornillos para bloquear el cuerpo

Install grill.

Instale la parrilla.

Remove grill. Trim soffit. Reinstall.

Retire la rejilla. Recorte el soffit. Reinstalar.

Direct air flow AWAY from home.

Flujo de aire directo LEJOS de casa.

Attach bracket flush to fascia board.

Coloque el soporte a ras de la tarjeta de la fascia.

Attach elbow and tubing. Seal.

Coloque el codo y los tubos. Sello.

Summary of content (1 pages)

PAGE 1
INSTALLATION GUIDELINES THE LIBERATOR BATHROOM FAN SOFFIT TERMINATION SYSTEM #LTS141 Provides a secure, professional finish for bathroom exhaust channeling through the soffit. 1 2 Attach bracket flush to fascia board. Snap body into bracket. 3 4 Coloque el soporte a ras de la tarjeta de la fascia. Flexible or Rigid Attach elbow and tubing. Seal. Coloque el codo y los tubos. Sello. 5 Encaje el cuerpo en el soporte. Attach bracket cap. Install screws to lock body Coloque la tapa del soporte.