Device Settings Alarm Config – Motion Sensor Setup WiFi Config – Wi-Fi Settings SD Card Record Config – Set up Memory Card Time Settings Misc Settings – App Settings Change password – Password/Security Device reboot -
Alarm Config Motion detection sensitivity 1-highest 2-high 3-high 4-normal 5-low 6-low 7-lowest disabled Cancel Alarm Schedule StartTime EndTime Warning Tone Alarm Interval 30—250 second Push Notifications On-Screen Display
SD Card Record Config No SD card detected Record Settings > Close On motion All day At specific time Cancel Resolution > 1080p 720p 480p Cancel Recording time (minutes) 1-20 minute Record sound > Constant Recording > (need to explain what this is) Loop recording: record all the time, and loop back to beginning of memory card when full
Time Settings Current Time Time Mode Year/Month/Day Time Zone Time Server Daylight Saving Time
Misc Settings Work LED I don’t know what this is
Change password Current Password New Password Confirm Password
Device Settings: 1. Motion detection sensitivity: When motion detection is enabled, the device will send you a notification automatically if motion is detected. You can choose a sensitivity level for Motion detection. It has 7 levels. When you choose “disabled”, motion detection will be closed. 2. Alarm schedule: You can set a time period to record motion and it will only send notifications and record during this time. 3.
Record sound: When you enable this functionality, it will record sound while recording video. Loop recording: Turn ON: the micro SD card will be overwritten after its space is full. 8. Time Setting Select the time mode (Year/Month/Day; Day/Month/Year; Month/Day/Year). Select Time Zone according to your local time zone. Finally click “Sync with App Time”, then the camera time will be in sync with your device time. 9.
