50Ft. Heavy-Duty Auto Rewind Air Hose Reel Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Klutch™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air hose reel is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Klutch Heavy-Duty Auto Rewind Air Hose Reel automatically rewinds hoses without kinks. Its speed control device keeps the reel under control at all times. The newly designed swivel and hose inlet connection seal against leaks. The durable construction, made from high quality, impact resistant polypropylene, makes it light-weight and compact. Technical Specifications Property Max Pressure (PSI) Max Pressure (BAR) Inlet/Outlet (in.) Hose Material Hose I.D. (in.) Hose Length (ft.
safety and could affect the life of the product. There are specific applications for which the product was designed. Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. It will be a safer experience and do the job better at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended.
HOSE REEL USE AND CARE Do not force the hose reel. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Store the hose reel when it is not in use.
(2) Remove the bolts that attach the guide roller bracket to the support post. (3) Rotate the guide roller bracket to the correct position, replace bolts, and tighten. 3. Using the four holes in the base, mount the reel in the desired location. Be sure to use appropriate hardware and tighten securely. 4. Apply Teflon tape or pipe sealant to supply line threads, attach to the reel inlet, and tighten. The other end of the incoming line can now be connected to desired supply source. 5.
Floor Ceiling Before Each Use ⚠WARNING Ensure that reel is properly installed before connecting input and output hoses. Bleed gas pressure from system before servicing reel. Ensure that reel, hose, and equipment being serviced are properly grounded. Check the hose condition for wear or damage, and check the swivel fitting for leakage. Replace any worn, damaged, or leaking parts.
Risk of explosion. Do not exceed the MAX working pressure. Wear the proper protective equipment including ANSI Z87.1 safety goggles. Do not point the nozzle or blow air at a person's face. If reel ceases to unwind or rewind, remove system pressure immediately. Do not exceed the back end mark when the hose is pulled out. To avoid damage to the reel, always hold on to the hose while it is rewinding. 1. Check reel for correct operation by slowly pulling out the hose.
If the spring does not work well… If air leaks out… The spring tension needs to be adjusted. Adjust the spring tension. 1. Pull out approximately 6 feet of hose and allow the drum to latch. 2. Remove hose stopper from hose, and feed hose back through guide. 3. Wrap the pulled hose one time around the drum to increase tension or un-wrap hose one time from drum to decrease tension. 4. Re-insert hose through guide, and install stopper onto hose end. 5. Unlatch the drum and check tension.
Reference 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 Part Number 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 48 49 50 51 52 Part Description Drum for Spring Spring Axle Drum Drum Assembly Hub Bearing Locking Ring Guide Plate Guide Sub-Plate Base Bolt (M6*16/M6*12) Washer Nut Bolt Retaining Ring Fitting Hose Rubber Bumper Block Axle Support Block Dog Spring Cam lock Retaining
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of two years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
