Instructions / Assembly

ManualsBrandsUnbranded ManualsTool Chest Combos41 in. 12-Drawer Tool Chest and Cabinet Combo in Stainless Steel

Do not let children near the tool cabinet.

Do not open more than one drawer at a time.

Fill from the bottom drawer up. If the tool cabinet

is filled from the top drawer down, it will be top-heavy

and may fall over.

DO NOT attempt to lift by the side handles using

chains, ropes or other lifting devices. The side handles

could fail, which may cause personal injury or damage

to the product.

DO NOT step or climb on this product or on the drawers.

DO NOT alter this product in any manner. For

example, do not weld external lockbars or attach

electrical equipment. This may cause product

damage or personal injury.

Keep the product on level surfaces. The product could

become unstable and tip if on an uneven surface,

which may cause personal injury or product damage.

When moving this product, do not pull it.

Push the product to prevent personal injury.

Close and lock drawers before moving this product.

Otherwise, they could roll open, making the product

unstable and may cause personal injury or damage

to product.

Use the brakes when not moving this product.

This will prevent the product from rolling, which

may cause personal injury or product damage.

DO NOT mount this product on a truck bed or on

any other moving object. This may cause personal

injury or product damage.

Be careful with sharp edges.

Always wear safety goggles when working with tools

and equipment.

New drawer slides may be stiff and difficult to open at

first. A gentle, outward pull should release the safety

catch that prevents the drawer from opening while the

tool cabinet is being moved.

When dusting, use a soft, clean cloth that will not

scratch the surface.

Liquid spills should be removed immediately. Using

a soft clean cloth, wipe the spill gently. Avoid rubbing.

For casters, use high quality bearing grease once

a year.

Lubricate the slides twice a year with a spray lubricant

or light duty oil.

To reduce the risk of injury, the user must read and understand this instruction manual before using this product for

the first time. Save these instructions for future reference.

1 Chest handles

Connectors

LED lighting

Battery 9V

M6 x 12mm hex bolts

2 2

1 Cabinet handle

M6 x 12mm hex bolts

M10X 25mm hex bolts

Fix castors

Swivel castors

2 4

41 7-DRAWER CHEST & 5-DRAWER CABINET

Summary of content (2 pages)

PAGE 1
New drawer slides may be stiff and difficult to open at first. A gentle, outward pull should release the safety catch that prevents the drawer from opening while the tool cabinet is being moved. When dusting, use a soft, clean cloth that will not scratch the surface. Liquid spills should be removed immediately. Using a soft clean cloth, wipe the spill gently. Avoid rubbing. For casters, use high quality bearing grease once a year. Lubricate the slides twice a year with a spray lubricant or light duty oil.
PAGE 2
Simply install the battery and then slide them into the battery case before using the LED lighting. Attach the cabinet handle to the tool cabinet with four M6x 12mm hex bolts. Repeat to attach the two chest handles to the tool chest. Attach the castors to the tool cabinet with four M10 X 25mm hex bolts for each castor. Place the chest on the cabinet. Fasten the connectors to the chest and cabinet with four M6x12mm hex bolts .