Instructions / Assembly

Product
Spec Sheet
KEY SPECIFICATION
BRANDGUARD VENTS Inc. 6 Rancho Circle, Lake Forest, CA 92630 T: 949-481-5300 E: [e-mail] www.BRANDGUARDVENTS.com
2” Fireplug Vent Model # FP2011
Eave Vents
Model
Size
W x L
NFVA Provided
Flanges
Available
Flange
Definition
Weight
FP2011
2” diameter
1.2 sq in
Flange Front
Flange Front
2lbs
Continuous Soffit and Custom sizes/materials AVAILABLE
BENEFITS:
 Safety vents that are used in areas prone to wildfires, wind driven rain, or
wind driven snow.
 Overlapping Baffle Protection (Patented)
o Air Flows through normally
o Resists the intrusion of Flames, Embers, Radiant Heat, Wind Driven
Rain and Snow
 Approved for use throughout California and beyond
 Anti -Clogging Overlapping Baffles plus 1/16” mesh plate on back side of vent
 Prevents Rodent Entry
 20 Year Warranty
 Easy to Install, Retrofit and Paint (comes with pre-drilled holes)
STANDARD MATERIALS
ASTM A653/A653M- G90 hot dipped galvanized steel, 26GA
ASTM D9092- mill phosphatized coating for painting. IF BONDERIZED
ASTM b370- Sheet Copper, 16oz and 20oz IF GALVANIZED
.025 x.025 hot dipped galvanized 23ga wire mesh
Installation:
See website: www.brandguardvents.com for installation instructions and video.
Product is intended to be used only under a roof overhang inserted into 2x blocking/frieze block. It is not intended
to be used on a sidewall without a protective roof overhang.