Instructions / Assembly

SPARK PLUG
CLEAN AND REGAP EVERY 600 HOURS
OPERATION OR REPLACE AS NEEDED.
Remove upper shell
Remove fan
Remove ignitor wire from spark plug.
Remove spark plug from nozzle adaptor using medium
phillips screwdriver.
Clean and regap spark plug electrodes to 3.5mm gap.
Reinstall spark plug to nozzle adaptor.
Attach ignitor wire to spark plug.
Reinstall fan and upper shell.
Remove upper shell
Remove fan
Remove ignitor wire from nozzle adaptor.
Remove spark plug from nozzle adaptor using medium
phillips screwdriver.
Clean and regap spark plug electrodes to 3.5mm gap.
(0.138”)
Reinstall spark plug to nozzle adaptor.
Attach ignitor wire to spark plug.
Reinstall fan and upper shell.
Nozzle Adaptor
Ignitor Wire
Spark Plug
Screw
GAP
Spark Plug
Ignitor Wire
Screw
Spark Plug
Nozzle Adaptor
Spark Plug
GAP