Instructions / Assembly

By following the instructions below,

your fence will remain secure

and won’t sag or fall down.

Multi-Purpose Reusable Fence System With Pocket-Net

Technology

Fence Installation:

Using a tape measure, mark for posts every 5 to 7 feet.

Drive in posts where marked and cover posts with caps.

Starting with the ﬁrst post pocket, slide fence approximately

4 inches onto the ﬁrst post. Stretch fence to next post and

repeat. When all posts are covered, slide fence all the way

down the posts.

Step

Solutions for the Great American Yard

EZ products

Questions?

Contact our Customer Service Department at 715-627-4826 during business hours or go to

volmcompanies.com/contact.

Bittering agent acts as a deterrent. It is a nontoxic, odorless additive applied during production. Mesh material

is high-density polyethylene. Dimensions shown are approximate. Some rolls may be slightly larger.

This is intentional to allow for slight shrinkage due to heat and stretching during production.

Fence will not sag or fall down if installed according to manufacturer’s recommendations.

Pocket-Net 6,367,781

volmcompanies.com

Required Tools:

• Rope or String (if needed) • Tape Measure • Marking Pen or Spray Paint (if needed)

• Hammer or Mallet • Scissors (if trimming fence is required)