Specification

ET200 AC Line Splitter and GFCI Receptacle Tester
• Combines a GFCI Receptacle Tester and AC
Line Splitter in one tool
• Line splitter features:
• Check outlet wiring, measure voltage, and
use your clamp meter to measure current
up to 15A without breaking the circuit
• Clamp around the 1X position for a direct
current reading
• Use the 10X position to display low current
readings multiplied by 10
• Receptacle Tester Features:
• Test GFCI for proper operation
• Detect faulty wiring in 3-wire receptacles
• Lights display 5 wiring faults: Open Ground,
Open Neutral, Hot/Ground Reverse, Open
Hot, Hot/Neutral Reverse
• Easy to read fault label on both sides for
receptacles with ground up or ground
down installation
Ordering Information:
ET200 AC Line Splitter and GFCI Receptable Tester
Features:
Two very useful and necessary tools for residential and
commercial electricians, home inspectors, and do-it-yourselfers
850 Perimeter Road • Manchester, NH • [phone] • [e-mail]
Specifications
Input Voltage
Current
Safety Category
120V ± 10%
Maximum 15A
CAT II 300
CAT II
300V
F IYT IN