USER’S MANUAL Model DWIP-720 IP CAMERA
INTRODUCTION THANK YOU Welcome Thank you for choosing First Alert for your security needs! For more than half a century, First Alert has made the home-safety and security products that make your job easier. Our products are built to the highest standard which has earned us a leadership role in the home-safety and security product categories. We are committed to serving our customers, from the professionals who install our products, to the families and businesses who count on them.
INTRODUCTION KEY PRODUCT FEATURES Main Description A Pan, Tilt, Zoom indoor camera that features direct IP connectivety over a Wi-Fi or wired network. Product Features • 1/4” CMOS Sensor with NTSC settings • 720 High Definition resolution • 11 Infrared LEDs • Night Vision range of 32 feet • 47 degree field of view • Built in microphone • Audio output • Alarm output • Motion detection • Video capture • Supports 802.11.B/G/N WiFi protocol (we recommend a 802.
INTRODUCTION TABLE OF CONTENTS Section 1 2 3 4 5 6 Description Page # Introduction Safety Product Overview 2-3 5 6-7 What is in the Box 6 Features and Setup 7 Program Function 8-9 Menus 8-9 Remote Viewing 10-11 Setup 10 Smartphone Apps 11 Program Functions 12 Motion Recording 12 Alarms 13 Program Settings 7 8 14-21 System & Video 14 Network & Alarms 15 Camera Properties 16 Devices Settings 17 Playback 18 Playback 19 Device Log 20 Help & Notifications 21 Appendi
SAFETY CAUTION STATEMENTS Safety Precautions • • • • Do not drop, puncture, or disassemble the IP Camera. Do not tug on the power adapter. Use the plug to remove it from the wall. Do not expose the IP Camera to high temperatures. For your own safety, avoid using the IP Camera when there is a storm or lightning in your area. • • Use the IP Camera with care. Avoid pressing hard on the IP Camera body. Do not use power cable if it is damaged or crushed.
PRODUCT OVERVIEW PACKAGE CONTENTS , What s in the Box* DWIP-720 IP Camera Quick Install Guide Installation Software RJ45 Ethernet Cable Wall Mount and Brackets Power Supply Anchors and Screws Page 6
PRODUCT OVERVIEW FEATURES & SETUP Camera Components Item Function Description 1 Photo Sensor Detects ambient illumination level 2 Camera Lens Lens for Camera 3 IR LED Light for Night Vision mode 4 Audio Output For connecting Speakers or Headphones 5 Run LED Status light for camera operation 6 Audio Input For connecting an external microphone 7 T/F Micro SD Card Slot 8 Antenna Connector Connect WiFi antenna 1 2 3 4 5 6 9 Network Socket For connecting RJ45 ethernet cable to P
PROGRAM FUNCTIONS MENUS Menus 1. Full Screen: Brings the camera into Full Screen. 2. Settings: Opens the settings. dialogue windows to make various changes to the DWIP-720. 3. Device Management: Set device settings (WAN only). 4. Playback : Allows the recorded files to be searched by Time/Day. Select the “specified time” box and enter the start/end time of recorded video. Click Playback to start search. 5. Change Password: Allows the login password to be changed. 6.
PROGRAM FUNCTIONS MENUS Menus (continued) Camera Display Menu: Options to change settings and adjust the camera view can be accessed by either right-clicking or left-clicking on the camera display. The functions of the two menus are explained at right. • Left Click Menu 1 2 3 5 6 7 8 4 • Right Click Menu (on camera video) 1. Return: Close the menu. 2. Listen: Turn on camera microphone. Click again to turn off. 3. Talk: Turn on camera speaker. Click again to turn off. 4.
REMOTE VIEWING SETUP & PC Remote Viewing LAN viewing on a shared network (From PC) Wireless Connectivity (From PC) (PC must be connected to the same local network as the Camera) 6. Repeat steps 1-4. 7. Right click on the Camera ID in the task pane. 8. Select "Set WIFI Connection". 9. Check the "start WIFI setting" box. 10. Click "Scan". 11. Select your Wireless network name from the Network Name (SSID) dropdown menu. 12. Enter your Wireless Network Password in the Password field. 13.
REMOTE VIEWING SMARTPHONE APPS Remote Viewing (continued) LAN viewing on a shared network (From iPhone/iPad/Android) (iPhone/iPad/Android must be connected to the same local network as the Camera) 1. 2. 3. Follow steps 1-3 in "Initial Camera Installation" instructions. Make sure your mobile device is connected to your Local Area Network (WIFI). Download the First Alert HD IP Camera Viewer from the appropriate App Store. 4. 5. 6. 7. Open First Alert HD IP Camera Viewer App on mobile device.
PROGRAM FUNCTIONS MOTION RECORDING Motion Recording Motion Record on Micro-SD Card: Inserting the micro SD card into the T/F slot of the camera: Insert the card with the terminals facing upward. Controls can be accessed through LAN tab on PC software. Micro-SD card capacity up to 32GB. Note:The camera must be powered off when inserting the micro SD card into the T/F slot. Otherwise, the card will not be recognized. (Micro SD card not inlcuded). 1. Connect to the DWIP-720 Camera. 3.
PROGRAM FUNCTIONS ALARMS Alarm Setup on PC Alarm Setup on PC: 2. 1. Click settings in the upper left screen. 3. 4. In the Local Alarm Alerts Tab, check “Local Alarm record”, and check “local Alarm capture”. Set the times for each. Click OK. Set the Motion recording the same way in the previous step for SD Motion recording set up. Files can be viewed in the Playback option in the upper left. Alarm Connections Alarm Inputs: Alarm inputs are switches that activate when a door, window, cabinet etc.
PROGRAM SETTINGS SYSTEM & VIDEO Program Settings System Tab: • When Closing the Main Menu When closing the main window, the program can either become minimized in the status bar or will close the program completely. • Exit Software Check the “need Inquiry” box if you want to be notified the software is exiting. • Notifications Select whether you want to show the icon or hide the notification icons.
PROGRAM SETTINGS NETWORK & ALARMS Program Settings (continued) Net Tab: • Proxy Set the proxy type (HTTP or SOCKS) and enter the IP, Port, and username and password. • Connect Set the connection type (default, TCP or UDP) and set the IP and Port. • Local Enter the UDP or TCP port for LAN connections. Also set the UPNP settings. • Network Operator Set defaults for ISP based on geographical area.
PROGRAM SETTINGS CAMERA PROPERTIES Program Settings (continued) Camera Properties Camera properties can be accessed by clicking on the wrench icon on the lower right of the screen, right-clicking on the camera display, and selecting “More (M)” or by left clicking on the camera display and clicking the “More” button. • Image Settings • Sharpness Set sharpness of camera feed. • Brightness Set brightness level of camera feed. • Saturation Set color saturatio level of camera feed.
PROGRAM SETTINGS DEVICE SETTINGS Device Management Device management can be accessed by clicking the camera icon in the upper left hand corner of the program. Add Device • Device Alias Device’s custom name. • Device ID Select from dropdown menu of devices (letter E followed by series of numbers). • Management Password Enter password (5 digits). • Set Access Password (Verify) Enter and Verify watch password (4 digits). • Watch Permission Set user watch permissions.
PROGRAM SETTINGS PLAYBACK Playback Playback can be accessed by clicking the magnifying glass icon in the upper left area of the program. • Find All Records All records are searched. • Start/End Time Narrow the search parameters. • The specified time Select to narrow search parameters. • Playback Click to begin search. • Search Results Lists recordings according to search criteria. Doubleclick an entry to launch in viewer.
PROGRAM SETTINGS PLAYBACK • Playback Click to begin search. Playback (continued) • Device ID Select which device to search from the dropdown menu. • Start/End Time Narrow the search parameters to a specific date range. • Search Results Lists recordings according to search criteria. • Device ID Select which device to view. • Online Users List current users connected to device.
PROGRAM SETTINGS DEVICE LOG Device Log The log displays all occurences for the connected devices. Log can be accessed by clicking the calculator icon in the upper left area of the software. Search Settings • Time/Date Enter time and date to narrow results • Device Lists device ID of action. • Time Lists time of recording. • User Lists user who triggered last known action. www.firstalert.
PROGRAM SETTINGS HELP & NOTIFICATIONS Help Help is launched by clicking on the question mark icon on the upper left menu. Device Notifications Help is launched by clicking on the question mark icon on the upper left menu. • Time Select which device to search. • User Narrow the search parameters. • Device Lists recordings according to search criteria. • Description Lists recordings according to search criteria.
APPENDIX TROUBLESHOOTING Troubleshooting Error Possible Cause Solutions Cable from power adapter is loose or is unplugged Cables are connected, but system is not receiving sufficient power • Confirm that the system is powered on (LED indicators on the front should be ON) • If the unit is connected through a power bar or surge protector, try bypassing the bar and connecting the power directly to the wall outlet • Confirm that there is power at the outlet • Connect the power cable to another outlet
APPENDIX WARRANTY Warranty PRODUCT LIMITED WARRANTY BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products warrants that for a period of one year from the date of purchase (the “Warranty Period”), this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or replace this product or any component of the product found to be defective during the Warranty Period. Replacement or repair will be made with a new or remanufactured product or component.
©2014 BRK Brands, Inc. a Jarden Corporation Company (NYSE:JAH) 3901 Liberty Street Road, Aurora, IL 60504-8122 Phone: 630-851-7330 Tech Services: 800-323-9005 www.firstalert.