Specification

Technical
Performance Data
Model No. Description
for uninsulated aluminum smooth, metal dryer duct pipe
that fits in wall cavity
In-Wall Dryer Venting - Aluminum smooth metal dryer
duct pipe - for new construction
Deflecto's policy is one of continual product improvement in design and manufacturing wherever possible,
therefore all specifications and designs are subject to change without notice and without incurring obligations. Rev.Oct 26 2005 DAIWtps
Technical Product Specifications
General Information
DAIW Fits installation up to 9ft(2.7m)
• allows for easy vent installation in laundry
rooms located in the center of homes
• fits any in wall installation up to 9 ft. tall
© 2001
DEFLECTO CORPORATION • P.O. Box 50057 • Indianapolis, IN 46250 • www.deflecto.com
DEFLECTO/Canada Ltd. • St. Catharines, Ontario • Canada L2M 3Y2
DAIW
6/01
Application View
Duct Diameter
• 4"(10.1cm) oval, 3 piece vent pipe
Materials
• 4" oval pipe, aluminum smooth metal
• oval-to-round top boot, aluminum
• oval-to-round 90° boot, aluminum
• thickness - .014"/ .35mm
Est. Operating Temperature
• -100° to 430°F/-38 C to 221 C
• class 0 Air Duct
• flame spread/ smoke developed - 0/0
New
Dryer
Manufacturer
Preferred
Location
Support
Strap
4" Oval-to-Round
90° Boot
42"
12"
4" Oval Pipe
(1) support strap
(1) Oval-to-Round Top Boot
4" diameter x 12" long
(1) Oval-to-Round 90° Boot
4" diameter opening
(3) 4" diameter Oval Pipe,
each 32" long,
with support strap
Fits any in-wall
installation
up to 9 ft.(2.4m)