Warranty

State quantity, figure number and size for each valve or
fitting you wish to order. See individual catalog pages
for specific or special product designations.
HOW MANY TO ORDER
NIBCO
®
valves and fittings are decimal packed for
your convenience in handling, shipping and stock-
keeping. Number in master carton varies with item.
POLICY ON RETURNS TO FACTORY
No NIBCO valves and fittings are to be returned
without prior written agreement. Transportation must be
prepaid. A 20% charge will be made to cover cost of
rehandling and reinspection.
TECHNICAL ASSISTANCE
Engineers, contractors, wholesalers or manufacturers
may obtain special or technical assistance from any
factory representative of NIBCO. Write, fax or phone.
NIBCO INC.
World Headquarters
1516 Middlebury Street
Elkhart, IN 46516-4740
USA
PH: 1.574.295.3000 or 1.888.446.4226
FAX: [phone] or 1.888.336.4226
NIBCO INC. LIMITED WARRANTY
Applicable to NIBCO INC. Plumbing Plastic Fittings and Valves
NIBCO INC. warrants each NIBCO
®
plumbing plastic fitting (including plumbing valves) to be free from defects in
material and workmanship under normal use and service for a period of five (5) years from the date of purchase.
In the event any defect occurs which the owner believes is covered by this warranty, the owner should immediately contact
NIBCO Technical Services, either in writing or by telephone at
1.888.446.4226 or 1.574.295.3000 . The owner will be
instructed to return said fitting or valve, at the owner’s expense, to NIBCO INC. or an authorized NIBCO INC. representative
for inspection. In the event said inspection discloses to the satisfaction of NIBCO INC. that said fitting or valve is defective, a
replacement shall be mailed free of charge to the owner, and NIBCO INC. shall further pay the installing contractor the sum of
ten ($10.00) dollars to apply on the cost of installation of said replacement fitting or valve.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY SPECIFICALLY EXCLUDES INCIDENTAL AND
CONSEQUENTIAL DAMAGES OF EVERY TYPE AND DESCRIPTION RESULTING FROM ANY CLAIMED DEFECT IN
MATERIAL OR WORKMANSHIP, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURIES AND PROPERTY DAMAGES.
Some states do not allow the exclusion or limitations of incidental or consequential damages, so
these limitations my not apply to you.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN
DURATION.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state and country to country.
How to Order
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
To the best of our knowledge, the information contained in this publication is accurate. However, NIBCO does not assume any liability whatsoever for
the accuracy or completeness of such information. Final determinations of the suitability of any information or product for the use to be contemplated
is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.
5
years
NIBCO
®
Plastic Fittings Warranty