Installation Guide

Warranty Replacement Instructions:
If you unexpectedly have a problem with a Swan hose and need to make a warranty claim simply
do the following:
1. Cut off both metal ends leaving 5 inches of hose attached.
2. Cut out a small 4 inch section of the damaged area
3. Email pictures or mail pieces with the receipt, if you have it and UPC barcode (copies are
accepted) to the address below.
4. You also have the option of emailing pictures of the cut off ends and defective section of
the hose to [e-mail]
5. It is important that you indicate the length of the hose and have a returnable street
address.
6. While we will do our best to process your return immediately, please allow 4-6 weeks for
delivery.
Swan Products LLC
1201 Delaware Ave
Marion, OH 43302
CS Phone # [phone]