Installation Guide

SKU # Selling Unit
BVS1 Bag of 25
Max. Voltage: 300V max. building wire
Connector Size: 1.5” x 1”
Wire Type: Copper/Copper
Wire Range: #18 SOL/STR
Temperature Rating: 105°C (221°F)
Silicone Sealant Temperature: -40°F to 400°F
INSTALLATION INSTRUCTIONS
PRODUCT SPECIFICATIONS
& MEASUREMENTS
Self Stripping Connector, no need to
strip wires.
Measurements (Inches):
A - 1.460
B - 1.040
C - 1.080
Blazing
TM
BVS1 SnapLoc Waterproof Connectors
50100-117 REV A 04/18
2-3 #18
Selected 300V Wire Combinations
For use with solid and/or stranded combinations.
Filled Connectors for Outdoor/Electrical Use
Contact factory for a complete list of wire combinations at 800.633.0232.
1
3
Unstripped
Stranded
Wire
Unstripped
Solid Wire
2
Pat #7,335,050
IMPORTANT: Turn off power before
installing or removing connector. Product
to be used in accordance with local and
national codes.
1. Rotate wings fully
apart beyond 90
degrees.
2. Insert unstripped
wires into holes.
Push wires to back
of the connector
(wire ends should be
visible through clear
back of connector).
3. Hold wires in place
while squeezing
handles together
until the connector
snaps shut.
www.kinginnovation.com
(P) 800.633.0232
(F) 636.519.5410
U.S. Pat. 7,335,050, D575,738, D575,230, and
other patents pending.