Product Brochure

QUIN GLOBAL US
[e-mail] | BulletBondAdhesives.com
[phone] | 5510 F St, Omaha, NE 68117
07-2020
TECHNICAL
DATA SHEET
WATER-BASED
PRESSURE SENSITIVE
FLOORING ADHESIVE
BB15-650
MORE GLUE.
LESS GAS.
Carpet Tile Underlayment Snowflake SprayLVT/LVP/ VCT CA Compliant Zero-Flam
Technology
PRODUCT DESCRIPTION
ADVANTAGES
DIRECTIONS FOR USE
Bullet Bond Flooring Adhesive Aerosol Can is a water based pressure sensitive flooring adhesive, suited for small jobs and repair
jobs. Bullet Bond Flooring Adhesive is formulated for bonding carpet tile, LVT/LVP/VCT and underlayment and allows for material
to be laid into wet adhesive and a releasable bond when dried. Formulated with CO-REZ Technology, which is an exceptional
formulation incorporating a highly engineered resin and gas matrix. The result: Greater Coverage from Less Aerosol Weight.
THIS UNIQUE PORTABLE, FULLY CONTAINED AEROSOL IMPROVES:
Ergonomics—Allowing you to stand while applying the adhesives, reducing stress on the back, knees, and shoulders.
Profitability—Decreases adhesive times by as much as 70% as compared to troweled or rolled-on adhesives.
Efficiency—Allows you to install flooring substrate immediately after spraying Bullet Bond, rather than waiting hours for troweled
or rolled-on adhesives to dry.
• CO-REZ Formula. Higher Coverage from Less Aerosol
Weight
• Excellent Adhesion to most carpet tiles and LVT/LVP/
VCT. Plasticizer Resistant
• Ready for traffic immediately
• Designed for Small Jobs / Repair Jobs.
• Extreme High Coverage 160 - 200 sq ft.
• High Application Speed
Suitable subfloors include self-levelling compounds, plywood (underlayment grade), OSB, hardboard and existing non-cushion
backed resilient floors (must be well bonded, sound, smooth and free of all waxes, finishes, strippers and cleaners). All paint
varnish, oil, wax and any other finishes which may inhibit good bond should be removed. Repair all joints and cracks with a latex
based levelling compound. Subfloors should be subject to 28 days of maturing and should have a maximum of 10.8% moisture
content before using this adhesive. Do not use this adhesive above these recommendations.
Subfloor preparation and moisture and PH testing must comply with industry standards, and floor-covering manufacturer’s
guidelines. The floor, room temperature, and the flooring materials must be maintained in accordance with floor covering
manufacturer’s recommendations
All subfloors should be free of dust prior to application.
• Repositionable during installation.
• Releasable bond for ease of flooring replacement
• No Flammable Ingredients
• Can be wet laid when at least one surface is porous,
such as wood or concrete
• Zero VOC, California SCAQMD Rule 1168 Compliant
CO-REZ
Technology