User manual

B & S Technology GmbH– www.bus-sitech.de

BS WATCH

MANUAL

_______________________________________________________________

Any information given base on manufacturer specifications. Printing errors, technical changes and errors are. Possible. They are subject to change

without further notice.

Thanks a lot for purchasing one of our products. Certainly, you will not regret your decision. You have

purchased a product that was built according, its conformity is verified. Please read this manual carefully to

ensure safe operation.

Caution: To prevent short circuits when connecting this device to a PC, please connect the USB cable

first to the watch, then to your computer.

1. Technical specification:

Resolution photo-mode: 1600 x 1200 Pixel

Pictures saved as: jpg-files

Resolution video-mode: 1280 x 960 Pixel

Videos saved as: AVI-files, 1GB/ 30 min video

Framerate: 30 fps

Minimum illumination required: 1 Lux

Power supply: 200mAh built-in

accumulator

Working temperature: -0 - +45°C

Recommended humidity: 20 – 85%

Internal storage: 4 GB

Data-interface: USB 2.0.

Supported operating systems: min. Windows 2000 or later. This device will be detected as removable

disk automatically

1GB für 30 minutes video

Charging time: ar. 2 hours

2. Keys:

1: Take a photo

2: Cap for protecting USB-interface

3: on/off, take videos

4: no function

5: Set (analog) time. For information about

how to set digital time, please refer to

chapter 5.

PAGE 1
B & S Technology GmbH– www.bus-sitech.de BS WATCH MANUAL _______________________________________________________________ Thanks a lot for purchasing one of our products. Certainly, you will not regret your decision. You have purchased a product that was built according, its conformity is verified. Please read this manual carefully to ensure safe operation. Caution: To prevent short circuits when connecting this device to a PC, please connect the USB cable first to the watch, then to your computer. 1.
PAGE 2
B & S Technology GmbH– www.bus-sitech.de BS WATCH MANUAL _______________________________________________________________ 3. Charging: To charge the built-in-accu, please connect the device with a cable, and then please connect the cable to your computer. While the device is charging, the LED is glowing continuously. This device will turn off as soon as the battery is too weak. The current video will be saved anyway. 4. Turn on: Please press Key (3) until the LED is glowing.