Assembly Instructions

ASSEMBLY INSTRUCTIONS
PARTS CONTENT
A, Plastic Base - 1PC
B, Plastic Cap - 1 PC
C, bolt (Long) - 1 PC
D, bolt (Short) -3 PCS
E, Nut - 3 PCS
F, Wrench -1PCS
G, Hex Wrench -1 PCS
H, Rake Head -1 PC
I, Arm Brace – 2 PCS
J, Curved Pole -1 PC
K, Long Pole – 3 PCS
ASSEMBLY STEPS
STEP 1
Place parts A-Plastic Base and B-Plastic Cap
to each side of the H-Aluminum Rake Head.
A-Plastic Base must be on the inner side. Use
D-Short Bolt to tighten up A & B on rake head
using G-Hex Wrench provided.
STEP 2
Insert parts J-Curved Pole into A-Plastic Base.
Make sure the 2 pop-up buttons on J-Curved
Pole go into the 2 holes on A-Plastic Base.
STEP 3
Attach 1 piece of I-Arm Braces on each side
from J-Curved Pole to H-Rake Head . Using
C-Long Bolt and E-Nut to tight up I-Arm
Braces attached to J-Curved Poles.
STEP 4
Use parts D-Short Bolt and E-Nut to lock up
the other end of I-Arm Brace that attached to
both sides on H-Rake Head. Use G-Hex
Wrench and F-Wrench to tight the bolt and nut.
STEP 5
Connect the parts K-Long Pole into J-Curved
Pole. Make sure the pop-up button on K-Long
Pole goes into the hole on the end of J-Curved
Pole or the other end of K-Long Poles.
Toll Free Number [phone]