Measurement Guide

up to 29 in (74 cm)
30-39 in (76-99 cm)
40-48 in (102-122 cm)
49-72 in (124-183 cm)
73-96 in (185-244 cm)
97-120 in (246-305 cm)
121-144 in (307-366 cm)
1 panel
2 panels
3 panels
3-4 panels
4-5 panels
5-6 panels
6-7 panels
For windows measuring You will need
Energy Saving:
Keep warm air in during winter and cool air stays in during summer
Light Blocking:
From room darkening to 100% hotel quality BLACKOUT
Noise Reduction:
Enjoy more peace and quiet and restful sleep
Look for the Thermalogic brand and enjoy these benefits!
3
easy steps to
select your
curtains
Step 1
Measure your window
Measure the width
Measure the width from one end of the inside
window frame to the other inside frame.
Add approximately 3” on each side to obtain
the wall mount width.
Measure the length
Measure the length from one end of the outside
window frame to the other outside frame.
Decide if you want your curtain to fall above (A),
below the sill (B) or to the floor (C).
The rod should be installed at approximately
6” above the trim.
Step 2
Pick your curtain
Colour
Shop by color to enhance or coordinate with your
room’s decor theme or desired color palette.
Fabric
Choose your panel texture and style to coordinate
with your room setting. Is your room setting:
casual, formal, dramatic or modern?
Consider the opacity of the fabric = the amount of
light filtering into the room. There are several options
to choose from: Sheer, Semi-sheer, Opaque, Room
Darkening and Blackout.
Length
The most common length is 84” and 95” and longer
lengths are trending due to new home window
constructions and the trend towards elongated looks.
Top Treatment
There are several header types available to choose
from in ready-made curtains (See adjacent page)
Step 3
Please refer to the table below for suggested number
of panels based on window size.
Based on 50” wide panels
Grommet
6 to 8 metal grommets
Easy to install
Diameter: 1.5”
Suggest 1” diameter rod
Tab Top
Typically 5 to 8 tabs
depending on style
Easy to install
and decorative
Fits any rods
TOP TREATMENT
6”
Dual Header
Back Tab/Pocket Top
Typically 5 to 8 tabs
depending on style
Easy to install
and decorative
Fits any rods
Pinch Pleated
Traditional look
Fullness already
accounted for
Pole Top
Traditional look
3” rod pocket will fit
up to 2” diameter
decorative rods
or wooden poles
Tailored
Fabric gathered along
the rod for a more
traditional look
Header: 1.5”
Rod Pocket: 2”
Suggest 1” diameter rod