Specification

END PLUG
DESCRIPTION:
Plugs let you artfully fill a pipe end that does not end in a fitting. The Plug works by
simply pressing the Plug into the pipe end and then you’re done. With the Plug inserted,
you can protect floors from sharp pipe corners and to give pipe ends a decorative finish
instead of leaving them open.

FEATURES:
PART # SIZING
INSTALLATION
SCREW (IN X MM)
a FITS PIPE OD (IN) WEIGHT (LBS)
678-404HC 3/4in 1/4X12.5 1.08 1.050 0.10
678-406HC 1-1/4in 3/8 x 12.7 1.16 1.660 0.24
678-404HC | 3/4in
678-406HC | 1-1/4in
· Zinc coating for corrosion resistance
· Galvanized steel construction for durable
performance
· Easy installation and removal, no permanent
connections
· No special tools needed
· Use an Allen Wrench for connections
· Able to operate in temperatures ranging from
-20°C to 300°C
Distributed by B&K LLC | 8285 Tournament Drive, Suite 150 | Memphis, TN 38125
[phone] | [phone] | [phone] | www.bkproducts.com
· Materials meets ASTM A-197 Standard
· Not for Plumbing Applications
· Not for Scaolding Applications
· Made to fit with SteelTek Pipe
CERTIFICATIONS & SAFETY:
California Prop 65 Warning:
This product contains chemicals including lead
known to the State of California to cause cancer
and birth defects or other reproductive harm. Wash
hands after use.
© 2017 B&K LLC
www.steel-tek.com
STS-001
04/27/17
DIMENSIONAL DATA: