Caution: You must read this before you proceed.
D Right Arm 1 E Left Leg 1 F Right Leg 1 Description QTY ① Bolt (M8X50mm) 17 ② Washer 17 ③ Spring Washer 17 ④ Allen Key 1 Label Picture Before Beginning Assembly:
Parts Introduction Loveseat Back(B) Left Arm(C) Right Arm(D) Loveseat Frame(A) Left Leg(E) Right Leg(F) FRONT FACING This Sofa has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Uncover the non-woven fabric and remove the Leg(E), Legs (F), and Hardware from Sofa frame (A). Step 2 D F Place the Right Arm(D) with Right Legs(F) on a clean , as shown in the picture. Insert Leg(F) into the mounting position of Right Arm(D) and attach using Bolts(①), Spring Washers(③) and Washers(②) with Allen Key(④). Do not fully tighten the Bolts. Step 3 C E Place the Left Arm(C) with Left Legs(E) on a clean , as shown in the picture.
Step 4 A A D F D F With the help from your partner turn up the sofa frame(A) on a flat surface as shown in the picture. Insert the Bolts of the Right Arm(D) into mounting positions of sofa frame(A). Attach sofa frame(A) to Right Arm(D) using Bolts(②), Washers(③), Spring Washers(④) with Allen Key(④) as pictured above.
With the help from your partner turn up the sofa frame(A) and Left Leg(E) on a flat surface as shown in the picture. Insert the Bolts of the Left Arm(C) into mounting positions of sofa frame(A). Attach sofa frame(A) to Left Arm(C) to using Bolts(②), Washers(③), Spring Washers(④) with Allen Key(④) as pictured above. Step 6 Taper Connectors on Backrest B Taper Connectors on Armrest C D A F E 6.2 6.
With the assistance from your partner. 6.1) Lift the Sofa Back(B) up, make sure the Sofa Back(B) is vertical and aligned to the Seat and Armrests . Align the Taper Connectors on the Sofa Back(B) with those on the Left Arm(C) and Right Arm(D). Your adult partner may need to push the Armrests inwards to the Sofa Back(B) a little bit. Slip and Slide the Sofa Back, in a gradual and in a balanced manner into the Taper Connectors . 6.
Step 8 E F Make sure all parts are connected and locked into position. Finally, seal the Seat Base Cover back on to the underside of the chair seat . Turn it the right side up.The chair is ready for use. Step 9 Your sofa is ready for use after put all cushions . Caution: This SOFA can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
