Specification

Product Submittal Sheet
Tech Support: 888-437-3244 Sales: 800-543-7140
Engineering Services: 877-832-3206 clarkdietrich.com
Furring / Hat Channel
Product Category: 7/8” Furring / Hat Channel - 25 gauge
Product Name: 087F125-18 (33 ksi, G40EQ)
18 mils (25 gauge)
Coating: G40EQ (G40 or G60 Available)
Geometric Properties
Depth 0.875 in Design thickness 0.0188 in
Width 1.250 in Min. steel thickness 0.0179 in
Yield stress, Fy 33 ksi Ultimate, Fu 45 ksi
Gross Section Properties of Full Section, Strong Axis
Cross sectional area (A) 0.072 in
2
Member weight per foot of length 0.244 lb/ft
Moment of inertia (Ix) 0.009 in
4
Radius of gyration (Rx) 0.354 in
Gross moment of inertia (Iy) 0.035 in
4
Gross radius of gyration (Ry) 0.698 in
Effective Section Properties, Strong Axis
Moment of inertia for deection (Ix) 0.008 in
4
Section modulus (Sx) 0.016 in
3
Allowable bending moment (Ma) 26.61 ft-lb
Allowable shear force (Va) 255 lb
Ordering Information:
Stock Length: 10’-0” & 12’-0” long pieces
Packaging: (10) pieces per bundle – (440) pieces per pallet
Packaging weight: 25 lbs./bundle
ASTM & Code Standards:
• AISI North American Specication [NASPEC] S-100-2007 with 2010 Supplement
• Non-structural furring is produced to meet or exceed ASTM C645
• Galvanized sheet steel meets or exceeds requirements of ASTM A1003
• For installation & storage information refer to ASTM C754
• MSDS & Product Certication Information available at www.clarkdietrich.com
Used in framing applications:
• Furring for walls & ceilings
• Furring out masonry walls
• Framing for drop ceilings
assemblies
Furring / Hat Channel
Furring / Hat Channel Allowable Ceiling Spans (Deection: L/360):
Hemmed legs (as shown) are only available in 25 gauge.
1/
2
”
7
/
8
”
1
-
1
/
4
”
2-23
/
32
”
Applied Load
Spans
4 psf
Hat Spacing (in) o.c.
6 psf
Hat Spacing (in) o.c.
13 psf
Hat Spacing (in) o.c.
12 16 24 12 16 24 12 16 24
Single 4’-5” 4’-0” 3’-6” 3’-10” 3’-6” 3’-1” 3’-0” 2’-9” 2’-5”
Multiple 5’-6” 5’-0” 4’-4” 4’-9” 4’-4” 3’-10” 3’-8” 3’-4” 2’-10”
CD-087F125-18 © 12/17/13 ClarkDietrich Building Systems
09.22.16 (Non-Structural Metal Framing)
Sustainability Credits:
For more details and LEED letters contact Technical Services at 888-437-3244 or visit www.clarkdietrich.com/LEED
LEED v4 MR Credit -- Building Product Disclosure and Optimization: EPD (1 point) - Sourcing of Raw Materials (1 point) - Material Ingredients (1 point) - Construction and
Demolition Waste Management (up to 2 points) - Innovation Credit (up to 2 points).
LEED 2009 Credit MR 2 & MR 4 -- ClarkDietrich's steel products are 100% recyclable and have a minimum recycled content of 34.2% (19.8% post-consumer and 14.4%
pre-consumer). If seeking a higher number to meet Credit MR 5, please contact us at ([e-mail] / 888-437-3244)
Project Information Contractor Information Architect Information
Name: Name: Name:
Address: Contact: Contact:
Phone: Phone:
Fax: Fax: