USE AND CARE GUIDE OUTDOOR TABLE LAMP-100W Above image represents many lamps, your lamp may vary in style. Questions, problems, missing parts? Before returning to the store, call Kenroy Home Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 THANK YOU We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this lamp. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information ....................................................................................................................................... 2 Warranty ...................................................................................................................................................... 2 Pre-Installation ............................................................................................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This lamp requires the use of one 120V, 60HZ, 100-watt max, medium-base type A bulb (not included). Do not exceed the recommended wattage.
Assembly instructions 1. Unpack the lamp and assemble shade □ Carefully organize and place all parts on a smooth, flat surface. line up all of the parts according to the assembly diagram. □ Insert the two screws (C) on top of cup into the two keyholes in glass dome holder and twist the shade counter-clockwise. □ Secure the shade (B) to the cup with a screw (C), then tighten the other (2) screws (C).
Assembly instructions (continued) 2. Install the bulb □ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets. □ Install the 120V, 60HZ, 100-watt max. medium-base type A bulb (not included) into the socket of the light lamp. NOTE: If LED bulb is used, the LED bulb must be rated for damp locations and enclosed luminaires.
Assembly instructions (continued) 3. Assemble the glass dome □ Screw glass dome (A) to the glass dome holder. □ Plug cord into an outlet and push the switch to turn on the light.
Important safety instructions □ Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance's plug. □ Ground fault circuit interrupter (GFCI) protection is to be provided on the circuit or outlet to be used for the wet location portable luminaires. receptacles are available having built-in GFCI protection and are able to be used for this measure for this measure or safety. □ Use only with an extension cord for outdoor use.
www.kenroyhome.com CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.