Instructions / Assembly

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 09-11-2015
Page 1 of 1
OFFICE CENTER
Model #6236-6237-883
HARDWARE LIST
A (18) Ф 1/4” x 19 x 2mm Flat Washers
B (18) Ф 1/4” x 13 x 1mm Spring Washers
C (6) Ф 1/4” x 3/4” Bolts
D (6) Ф 1/4” x 1-3/8” Bolts
E (6) Nuts
F (1) Wrench
G (1) 4mm Allen Wrench
H (2) Mounting Bars
PARTS LIST
I (1) Center Bridge
J (2) Pier Tops
K (2) Pier Bases
QTYPART
6E
1G
HARDWARE QTYPART HARDWARE
1
2
F
H
6C 6D
18A 18B
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
DD
E
E
H
H
H
H
I
I
BB
B
B
B
B
A
A
A
A
A
A
CC
STEP 1 - Figure 1
Begin assembly by standing up the Pier Bases
(K), which should be assembled with the Pier
Tops (J), next to each other. Lower the Center
Bridge (I) in between the Pier Tops (J) and
secure by placing the Mounting Bars (H) on to
the ends and secure using 3 Bolts (C), 3
Spring Washers (B) and 3 Flat Washers (A)
per side from the top.
STEP 2 - Figure 2
From the bottom, insert 3 Bolts (D), 3 Spring
Washers (B) and 3 Flat Washers (A) and
secure from the top with 3 Flat Washers (A), 3
Spring Washers (B) and 3 Nuts (E). Tighten all
bolts with Allen Wrench (D) and nuts with
Wrench (F) provided.
J
J
K
K
FIGURE 1
FIGURE 2