Measurement Guide

ManualsBrandsUnbranded ManualsWindow TreatmentsRialto French Blue Polyester Window Straight Valance

HOW TO DRESS YOUR

WINDOW CURTAINS

and VALANCES

Straight.........................................

Ascot.............................................

Waterfall.......................................

Cur tains

Valances

Grommet......................................

Rod Pocket....................................

Back Tab.......................................

Summary of content (7 pages)

PAGE 1
H OW TO DR E S S YOUR W INDOW CURTAINS and VAL ANCE S Curtains Grommet...................................... 1 Rod Pocket.................................... 2 Back Tab....................................... 3 Valances Straight......................................... 4 Ascot............................................. 5 Waterfall.......................................
PAGE 2
GROMMET PANEL HARDWARE Traditional or decorative curtain rod. Curtain rods usually include brackets and screws. HANGING INSTRUCTIONS 1. Install curtain hardware on window trim or wall depending on your desired result. 2. Insert curtain rod through each grommet. TIPS 1. Group the grommets all together in your hand first, then slip them through the rod with ease. 2. Check grommet opening measurement to ensure you purchase a rod size that will fit through the opening.
PAGE 3
BACK TAB PANEL HARDWARE Traditional or decorative curtain rod. Curtain rods usually include brackets and screws. HANGING INSTRUCTIONS 1. Install curtain hardware on window trim or wall depending on your desired result. 2. Fabric loops are on the reverse of the curtain. Insert the curtain rod through each fabric loop and adjust curtain panel to create an evenly spaced header.
PAGE 4
ROD POCKET PANEL HARDWARE Traditional or decorative curtain rod. Curtain rods usually include brackets and screws. HANGING INSTRUCTIONS 1. Install curtain hardware on window trim or wall depending on your desired result. 2. Glide the rod through the rod pocket ensuring the front of the panel is facing forward and pull all the way through. 3. Adjust the header to be spaced evenly and standing up straight for a finished look.
PAGE 5
STRAIGHT VALANCE HARDWARE Traditional curtain rod brackets and screws. HANGING INSTRUCTIONS 1. Measure the spots for the curtain rod brackets first. 2. Thread the valance onto the rod and then hang the rod on the brackets. Adjust the valance so it is distributed evenly across the rod. TIPS A valance should traditionally cover the top 2-6 inches of your window frame, so brackets should be placed about 4 inches above the top of the window.
PAGE 6
ASCOT VALANCE HARDWARE Traditional rod and curtain rod brackets. HANGING INSTRUCTIONS 1. Meaure the spots for the curtain rod brackets first. 2. Thread 3 ascot valances onto the rod and then hang the rod in the brackets. Adjust the curtain so it is distributed evenly across the rod. 3. Put the rod onto the brackets and hang the valance. TIPS A valance should traditionally cover the top 2-6 inches of your window frame, so brackets should be placed about 4 inches above the top of the window.
PAGE 7
WATERFALL VALANCE HARDWARE Detachable curtain rod and curtain rod brackets. HANGING INSTRUCTIONS 1. Separate the curtain rod. Hold your first valance with the pattern facing you. Each valance contains a header and a rod pocket on both the left, and right side. Insert the left curtain rod into the bottom of the left rod pocket and thread the valance through. 2. Repeat Step 1 with the second valance. 3.