Instructions / Assembly

TEL: [phone] or 800-458-5876 FAX: [phone] or 631-234-4778
E-mail: [e-mail] Website: www.dannermfg.com
E G Danner Mfg. Inc. 160 Oval Drive Islandia, NY 11749
LIMITED WARRANTY
Danner pumps are warranted against failure due to defects in materials and/or
workmanship as follows: Pump body and cover within 5 years, impeller and included
accessories within one year of original date of purchase. This warranty covers defects
occurring under normal use. The warranty and remedies set forth herein are conditional
upon proper installation, use, maintenance, storage, and conformance with the applicable
use. It will be based upon Danner Mfg. discretion as to whether the defects are
of manufacturing origin. For warranty repair, return only the part that is defective to our
factory. Please include a dated proof of purchase and $5.00 for postage and handling.
Any damages due to improper installation are not covered by this warranty. This
warranty does not apply to appearance or accessory items. This warranty does not
include damage due to handling, transportation, unpacking, setup, installation, repair or
replacement of parts supplied by any other than Danner Mfg.; improper maintenance,
modification or repairs by the purchaser; abuse, misuse, neglect, accident, fire, flood, or
other acts of God. Any oral statements about this product made by the seller, the
manufacturer, their representatives or any other parties do not constitute warranties
and shall not be relied upon by the user and are not part of this contract. Neither the
seller nor the manufacturer shall be liable for any injury, loss or damages, direct,
incidental, or consequential, including but not limited to incidental or consequential
damage for lost profits, lost sales, injury, and inability to use the product and the user
agrees that no other remedy is available. Before using, the user shall determine the
suitability of the product for their intended use and the user shall assume all risk liability
whatsoever in connection therewith. To validate this warranty, keep your proof of
purchase (copy of sales receipt). Warranty covers the repair or prorated replacement of the
Danner Mfg. products. Danner Mfg. denies all liability for any other loss including but not
limited to loss of equipment, income, livestock, or personal injury.
THE FOLLOWING VOIDS WARRANTY: LINE CORD OR PLUG IS ALTERED OR
CUT, PRODUCT LABELS ARE DEFACED OR REMOVED. PRODUCT IS IMPROPERLY
INSTALLED OR MAINTAINED BY USER OR THEIR AGENT. PRODUCT IS ABUSED,
MISUSED, OR DAMAGED BY USER OR THEIR AGENT. PRODUCT IS NOT REMOVED
FROM SERVICE AND DRIED DURING FREEZING CONDITIONS.
# Description
1 Filter Cover*
2 Foam Filter
3 Fiber Filters
4 Filter Bottom*
5 Bell Fountain*
6 Bell Fountain*
7 Foam Block
FILTER & FOUNTAIN
PARTS REFERENCE
02019 POND FILTER 02273 BELL
FOUNTAIN
*NOTE:
Parts with
asterisk (*)
are listed
here for
reference
only and
may not be
available.
ITEM # 12195
Filter pad replacement pack for
Garden Pond Filter includes:
Foam Filter 1 pc
Fiber Filters 2 pcs
ITEM # 12600
Replacement foam block
for Bell Fountain includes:
Foam Block 1 pc
Danner Magnetic Drive Pump
for Submersible or In-Line use
INTRODUCTION
Thank you for purchasing this Danner water pump. This submersible or in-line pump
provides a continuous stream of water with an adjustable flow control. Danner
pumps are carefully inspected and tested to insure both safety and operating
performance. However, failure to follow the instructions and warnings in this manual
may result in pump damage and/or serious injury. Be sure to read and save this
manual for future reference.
The Model 1.9 pump has a number of features which make it versatile.
A
1
/
2
” inside diameter tube may be slipped over the outlet or a
1
/
4
” pipe thread fitting
can be used. The pump also comes with an elbow which will accept
3
/
8
” ID tubing or a
1
/
2
” ID soft tubing. The elbow is for submersible use only. The elbow directs the soft
tubing horizontally to prevent kinks. When there is limited room in the base of
statuary, the pump can be placed with the screen inlet down for operation in shallow
water.
The kits that utilize the 190 pump both include filtration media and a bell shaped
fountain. The filter media keep the water clean and protect the pump. In most set-ups
they can be can be rinsed and re-used several times before needing replacement.
SAVE THESE
INSTRUCTIONS
CARE AND OPERATING INSTRUCTIONS
Model 1.9
ITEM # 02519
ITEM # 40120
Model 1.9 Pump With filter
ITEM # 02019
Model 1.9 Pump
With Fountain & Block Foam Filter
ITEM # 02273
Shown with and without pre-filter
cover and elbow adapter
Always use a properly grounded outlet. Do not immerse plug in water. DO NOT
REACH INTO WATER TO REMOVE PLUG. TURN OFF CIRCUIT FIRST. A “drip loop” should
be provided. The “drip loop” is a loop in the line cord below the level of the receptacle
or plug that prevents water from running along the cord. The National Electric Code
requires that a ground fault circuit interrupter (GFCI) be installed on the branch
circuit supplying fountain or pond equipment. Your dealer can supply GFCI units.
NEVER REMOVE THE GROUND PIN FROM PLUG. WARNING: FOR YOUR PROTECTION
ALWAYS UNPLUG THE UNIT FROM ITS POWER SOURCE BEFORE INSTALLING OR
SERVICING. SHOULD THE UNIT APPEAR TO BE NOT WORKING DO NOT REACH,
REMOVE OR DISASSEMBLE UNIT BEFORE YOU DISCONNECT POWER. The pump is
intended to pump water only. It cannot be used to pump oils, solvents or gasoline.
WARNING!! PONDS ARE DANGEROUS TO SMALL CHILDREN!
NEVER LEAVE CHILDREN UNSUPERVISED NEAR A POND
ZG125 revE 7/17
ELECTRICAL PRECAUTIONS










Subscribe to our YouTube Channel and view all of our product videos.