Instructions / Assembly

Installation Technique

Installing your WallDesign Panels

The following are illustrations of all the tools and accessories needed

to successfully install your WallDesign panels.

A simple precaution will guarantee

the problem-free installation of your

long-lasting panels.

Take into account the humidity level

of the room where you will

be installing your panels.

Above all, store your WallDesign

panels for a period of 48 to 72 hours

in the room where you plan to install

them. It is essential that they become

acclimatized to the room temperature

and humidity.

For wood-based products, the humidity

level has an impact on the wood’s

expansion and contraction. The relative

humidity of the room must not be less

than 30 % or more than 50 %.

PAGE 1
Installing your WallDesign Panels The following are illustrations of all the tools and accessories needed to successfully install your WallDesign panels. Installation Technique 1 A simple precaution will guarantee the problem-free installation of your long-lasting panels. Take into account the humidity level of the room where you will be installing your panels. Above all, store your WallDesign panels for a period of 48 to 72 hours in the room where you plan to install them.
PAGE 2
3 4 Even the simplest installations require some preparation. Your walls must be as level as possible. For impeccable results... The panels can be directly installed on studs but we strongly recommend adding furring strips, which will enhance the quality of the joints and provide increased solidity. A sound take-off will guarantee successful results ! Always work with a level. At the base of the wall, draw a reference line with your level.
PAGE 3
The first panel can now be installed. Your level line is your point of reference. Position the first panel aligning it with the line drawn on the wall. Then start nailing making sure to do so in the grooves so that the nails are less visible and to ensure a smoother finish. 5 In construction, joints are always somewhat touchy areas. Reinforce each joint with this helpful hint. Apply adhesive to the joints to prevent them from separating. Then, simply remove the excess adhesive.