Product Manual

ATTACH ENERGY
ABSORBER
ONLY TO DORSAL
D-RING
MAXIMUM ATTACHMENT DISTANCE
WITH HOOK WITHOUT HOOK
ACCEPTABLE DESIGNED RETAINER
DO NOT
ATTACH ENERGY
ABSORBER
TO ANCHOR
1. Hold harness by back
D-ring. Shake harness
to allow all straps to
fall into place.
2. Slip straps of
harness over
shoulders.
3. D-ring should
be located at
middle of back.
4. Make adjustments
for torso length.
5. Buckle waist
belt.
6. Pull chest strap in front of
shoulder straps and fasten
at mid chest. Tighten to
keep shoulder straps tight.
7. Pull leg straps around
to the outside of the leg
and fasten.
8. Properly worn
harness.
When using lanyards commonly referred to
as "100% tie-off”, "Y" type, "double" or "twin
leg" shock absorbing lanyards. This
supplement provides additional information
on the use of these types of lanyards that are
used with a personal fall arrest systems.
Practices that must be followed in order to
use a 100% tie-off lanyard safely.
1. The shock absorber pack portion of the
lanyard assembly MUST be connected
to the back dorsal D-ring ONLY, by way
of a double locking lanyard snap hook
(other connectors provided, consult
ULTRA-SAFE, INC.) connect shock
absorber directly to the dorsal D-ring.
2. Do not connect shock absorber to the
anchorage point at any time.
3. Do not connect the unused leg of the
lanyard assembly to any portion of the
full body harness, unless a specifically
designed lanyard snap hook loop
retainer is provided for this purpose.
4. When connecting from one anchorage
point to the next (traversing a vertical or
horizontal structure) do not connect to
an anchorage point further apart than,
the length of the lanyard.
5. When using a 100% tie-off lanyard
assembly, do not allow any part of the
lanyard to pass under arms or legs.
6. Connection of both lanyard legs to
separate anchorage points is
acceptable, as long as anchorage
points are within the length of the
lanyard.
2
Tongue buckle harnesses come in different styles, pads on back, no tool belt, etc.,
but proper adjustment and fit is critical. Refer to these instructions for key adjustment points.
Note: For more on proper fit, refer to our website. Click on Download DVD’s and refer to Video #12.