MODEL # 02-07-0055 ASSEMBLY INSTRUCTIONS 05-26-10
DETAILS PAGE (Surface Mount) FOOTING DETAIL NOTE: FINISHED SURFACE 2" (51 mm) OR 3" (76mm) RUBBER SURFACING BASE PLATE - Hole depths indicated on all ground plans are measured from the finished surface. See Footing Detail. - All Footer dimensions are based on level finished surface. 30" [762 mm] Concrete Required : Approx. .5 Cubic Yards (.35 Cubic Meters) Suggested Min.
INSTRUCTIONS (Surface Mount) Parts List Letter Description Quantity Part Number Hardware Complete 1 33-12-0064 1/2”x10-1/2”Anchor Bolt A 4 33-11-0703 1/2” Flat Washer 4 33-02-0003 B 1/2” Hex Nut 33-01-0004 4 C C B 1/8” (3mm) 1-7/16” (36.5mm) Read all installation instructions thoroughly before starting. 3/4” Plywood Template Concrete Instructions: 1. Dig 30”(762mm) diameter x 30“(762mm) deep hole according to the Footing Detail. 2. Use the spring base plate to make a approx.
DETAILS PAGE (In-ground Mounting Kit) BASE PLATE 9" (229mm) ENGINEERED WOOD FIBER 9" (229mm) 4" (102mm) FINISHED SURFACE NOTE: - Hole depths indicated on all ground plans are measured from the finished surface. See Footing Detail. - All Footer dimensions are based on level finished surface. IN-GROUND MOUNTING BRACKET 20" [508 mm] Concrete Required : Approx. .14 Cubic Yards (.1 Cubic Meters) Suggested Min.
INSTRUCTIONS (In-ground Mounting Kit) Parts List Letter Description A B C In-ground Mounting Bracket 3/8” x 1-1/4” B.H.C.S. Bolt 3/8” Hex Nut Quantity Part Number 1 4 4 G-02-07-0107 33-05-0002 33-01-0002 SEE SAW BASE PLATE B Footer Posts MUST be positioned perpendicular to Horizontal See Saw Post Horizontal See Saw Post A C Figure 1 FOOTER POST Read all installation instructions thoroughly before starting. Instructions: 1.
