INSTRUCTION MANUAL CLM100 1-800-547-5740 • Fax: (503) 643-6322 www.ueitest.com • email: info@ueitest.
Introduction The CLM100 Cable Length Meter is ideal for measuring cable length on the spool or in existing conduits. Includes test leads, copper calibration bar, an abrasive pad for removing oxidation and carrying case. Features include • 3 digit display with enunciators • Measures in FEET (ft) or METERS (m) • Measures COPPER (CU) or ALUMINUM (AL) wire • Resistance range for milliohm measurements • Automatic temperature compensation • User calibration mode.
Specifications 3. Strip the insulation back on each end of the wire being tested. NOTE: Make sure both ends of the wire under test are clean and the conductor is fully exposed. The insulation must be stripped away so the Kelvin clips can be connected across the diameter of the wire. Use the abrasive pad to clean the wire ends. 4. Using the selector on the CLM100, turn to the size of wire under test. 5. Press the “COPPER” button if copper wire is being tested.
CLM100 Cable Length Meter Limited Warranty The CLM100 is warranted to be free from defects in materials and workmanship for a period of five years from the date of purchase. If within the warra n ty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at UEi’s option.