Quick Start Guide

QUICK START GUIDE

u-line.com

Remove LED Light Cover

1. 



2. 

Note: DO NOT clean the LED light strip.

Reinstall LED Light Cover

1. 

and hold in place.

2. 



3. 

cover until it snaps into place.

Hinge Pin

Bracket

Remove Door, Brackets, and Hinge

1. Hold door to keep it from falling.

2. Remove top hinge pin.

3. 

bottom hinge.

4. Take out screws and remove both hinges.

5. 

Repeat for bottom surface of door.

6. Thoroughly clean and sanitize all surfaces of the door,

the brackets, hinges, and all hardware.

7. Reinstall hinges, door, and all hardware by reversing

steps 1-5 above.

Hinge

Hinge Pin

Bracket

SLOT

TAB

LED

LIGHT STRIP

LIGHT COVER