Quick Start Guide

QUICK START GUIDE

u-line.com

Interior Adjustments (RE Models)

Slide-out Metal Shelf Removal



adjustment positions.

All refrigerators ship with 2 slide-out metal shelves.

Remove and reposition as desired.

Note: Do not exceed 52.8 lb (24 kg) per shelf when

1. Remove all items from shelf.

2. 



the slot.

3. 

slots. If only repositioning the shelf, do not remove

completely - go to “Stainless Steel Shelf Installation”

Step 2.

4. Slightly tilt one side. Gently pull shelf towards you to

remove from unit.

Note: Take care when removing shelf to avoid

scratching interior of unit.

5. Once removed, retract the slides.

Note: The slides on the shelf have a thin coating which

is used to block moisture and provide lubrication. Use

care when handling.

Slide-out Metal Shelf Installation

1. Fully extend slides on both sides of shelf.

2. Insert shelf into unit with one side tilted slightly

upward until back pin is between front and rear rail

supports.

3. Tilt shelf back to horizontal and line up 2 back pins



rear and front rail support. Continue inserting shelf

until both pins engage. The front will set down slightly

and lock into place. Repeat on right side.

Center

the pin

Center

the pins

Front Pin

Back Pin