30 kg 66 lbs 9 kg 20 lbs max. 86015 A www.tvilum.
中文 (zh) 重要提示： 随防倒支架同时提供的螺钉只可用来固定家具的防倒支架。此 English (en) IMPORTANT. The screw supplied together with the anti-topple bracket is to be used only for fixing the anti-topple bracket to the furniture. In addition to this, you will need to choose a screw or fitting which is suitable for securing the bracket to the kind of walls you have. If you are unsure about what type of screw to contact your local hardware store.
AVERTISSEMENT : afin d'empêcher tout basculement, ce mobilier doit être utilisé avec le dispositif de fixation au mur fourni. Le basculement du mobilier constitue un risque pour la sécurité. Deutsch (de) WICHTIG. Die dem Kippschutz beigefügten Schrauben sind ausschlieβlich für die Befestigung des Kippschutzes am Möbelstück vorgesehen. Für die Befestigung des Kippschutzes an der Wand benötigen Sie zusätzlich Schrauben oder Beschläge, die zur Beschaffenheit der Wand passen.
фиксации держателя на стене в зависимости от ее типа. Если вы не уверены, какой шуруп использовать, обратитесь за консультацией в местный магазин строительных товаров. ПРЕДУПРЕЖДЕНИЕ. Во избежание опрокидывания мебели следует использовать предоставленное настенное крепление. Опрокидывание мебели влечет опасность травмирования. Srpski (sr) Važno: Ovaj zavrtanj, koji se isporučuje zajedno sa sigurnosnim nosačem, treba koristiti samo za pričvršćivanje sigurnosnog nosača na nameštaj.
20203 x44 10401 x8 25288 x10 31513 x20 25604 x12 20609 x8 20228 x24 26020 x24 31687 x20 26096 x12 21203 x4 26214 x12 25215 x24 41407 x12 26297 x12 32810 x4 86015 -50
6827 x4 66825 x2 80113 x6 94073 x2 66829 x2 97642 x1 86015 -50
LG LH FI 10147 FH GD FH FI IG I ED ED ED EE EE EE 00753 (x6) 03332 (x6) 07205 (x6) 00754 (x6) EE/ED (x6) 86015-50
1 # 20203 x8 # 31687 x8 FH (x2) 2 # 31515 x8 LG I 86015 -50
3 FH FH I 4 FH 10147 FH I 86015 -50
5 LG FH FH 6 # 10401 x8 A B A=B FH LG 10147 I FH 86015 -50
7 # 66829 x2 # 25288 x4 I 8 # 25288 x6 I 86015 -50
# 20609 x8 9 # 21203 x4 # 32810 x4 # 66825 x2 # 66827 x4 # 97642 x1 1. 2. 3.
10 # 20203 x12 FI (x2) GD 86015 -50
# 25215 x12 11 # 26020 x12 FI 37mm 1,46in # 41407 x6 FI 68mm 2,68in 68mm 2,68in 37mm 1,46in 1. 1. 17. 1. 15. 2. 3. 4. 10. 17.
# 25215 x12 12 # 26020 x12 # 41407 x6 GD 1. 1. 17. 1. 15. 2. 3. 4. 10. 17.
# 25604 x6 13 FI GD IG FI 86015 -50
14 # 25604 x6 FI LH GD FI 15 86015 -50
# 26096 x12 16 LG FI FH 86015 -50
# 94073 x2 17 1. LG 2. 30mm 1 1/5" 10147 3. 1. Place the furniture against a wall of your choice. Locate the hole(s) of back panel(s) 10147 close to the bottom side of top panel LG. Through the hole(s), use a pen to make mark(s) on your wall. 2. Move the furniture away from the wall. From the mark(s), measure straight down by 30mm or 1.1/5" and create new mark(s). Through the new mark(s), attach the tip-over restraint(s) to your wall.
18 # 20203 x24 # 31513 x12 # 31687 x12 EE/ED (x6) 00753 (x6) 00754 (x6) 19 # 20228 x24 007 54 ? 007 53 32 033 x6 86015 -50
20 007 54 07205 32 033 007 53 x6 21 EE/ED (x6) 007 54 007 53 x6 86015 -50
# 26297 x12 # 80113 x6 EE/ED (x6) x6 23 86015 -50
24 # 26214 x12 EE ED EE ED EE ED 86015 -50
