Instruction Manual 1T-FC-766 HDMI to 3G SDI Converter
Table of Contents 1.0 Introduction 3 2.0 Specifications 6 3.0 Checking Package Contents 7 4.0 Connecting The Hardware 7 5.0 Operating The Unit 8 6.0 Troubleshooting 10 7.0 Limited Warranty 10 8.0 Regulatory Compliance 12 9.
1.0 INTRODUCTION Thanks for purchasing the 1T-FC-766 HDMI to 3G SDI Converter product from TV One. The 1T-FC-766 HDMI to 3G SDI Converter allows HDMI signals to be displayed on an SDI monitor. The high Bitrate processing of 2.970 Gbit/s ensures fast signal transmission without signal loss and also allows great flexibility in monitor selection since extremely high quality displays can be accomplished on a high resolution SDI monitor.
1.2 Features This 1T-FC-766 HDMI to 3G SDI Converter has many features that enable it to perform in a superior manner. Among these features you will find: • Supports HDMI timing: 480i, 576i, 720p50/60, 1080p 24/25/30, 1080i 50/60, 1080p 50/60 • Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.
2.
3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: • • • 1x HDMI to 3G SDI Converter unit 1x Power Adapter 1x Operations Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately. Have the Model and Serial Number and Invoice available for reference when you call. 4.
Lastly, connect the AC adapter to the unit and then to the AC source. Make sure that the Power LED illuminates. 5.0 OPERATING THE UNIT Note: Before you begin to familiarize yourself with the 1T-FC-766 HDMI to 3G SDI Converter, make certain that your HDMI source is supported by the unit. The 1T-FC-766 supports these standard formats: 480i, 576i, 720p50/60, 1080p 24/25/30, 1080i 50/60 and 1080p 50/60. The 1T-FC-766 HDMI to 3G SDI Converter will function without operator intervention once it is set up.
If the SDI monitor does not display a signal properly, you will need to “clone” the EDID characteristics of an HDMI monitor, one that matches the resolution characteristics of the SDI monitor you intend to use, into the 1T-FC-766. To clone the HDMI monitor’s EDID information into the 1T-FC-766, perform the following steps: 1) 2) 3) 4) Set the three position switch to "User EDID" Connect the HDMI monitor you wish to clone to the HDMI Input.
Notes: 1) A DVD’s HDMI default timing is often set on 480p but SDI does not support that timing so it’s possible that the image will not display on the SDI monitor. To avoid such an event, it’s suggested that you set the source output timing to the “AUTO mode” so that the source equipment will read the 1T-FC-766 default input setting and send the proper EDID native timing. 2. Only when the EDID button is held down will the EDID update procedure progress.
1. TV One branded products based on TV One’s CORIO technology are warranted for a period of five years from the date of purchase. This includes products with the model number prefix of C2, 1T-C2, CX, A2 or S2. 2. TV One-task branded products, other than those based on TV One’s CORIO technology mentioned above, are warranted for a period of three years from the date of purchase. This includes products with the model number prefix of 1T, with the exception of 1T-C2. 3.
8.0 REGULATORY COMPLIANCE The 1T-FC-766 3G-SDI Extender/HDMI Converter has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. This Product and Power Adapter is RoHS Compliant. 9.
