INSTALLATION MANUAL
IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed ,including the following: WARNING: To reduce the risk of burns,fire,electric shock or injury to persons. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert any object into any opening.Do not use outdoors. WARNING: Risk of electric shock.
HARDWARE AND TOOLS Power Drill Mallet 1/4”& 1/8” Drill Bits Tape Measure Pencil Safety Goggles Level HARDWARE LISTS ITEM IMAGE NAME Screw ST4*35 Wall Anchor Aluminum Alloy Plate 2
INSTALLATIONINSTRUCTIONS Apply to the below style of LED medicine cabinet Please read carefully and save these instructions Don't discard any of the packaging until you are sure that you have all of the parts and the fitings Make sure power to the junction box is off before commencinginstallation. IMPORTANT 1. Unpack LED cabinet. DO NOT lay cabinet on tiled or concrete surface prior to installation Cabinet must be on protected surface to prevent chipping of the corners 2.
4
5
8 6
Introduction of Touch Function After power on, the button shows white and it is in waiting stagte, click to turn on the light function and the button turn on yellow. Click again to turn off the light function and the button to turn to white. Long click the button to make the light gradually dims Click the button again and the light gradually brightens After power on, the button shows white and it is in waiting state, click to turn on the defogging function and the button turn on yellow.
B A C A - Width B - Height C - Depth Unit: Inch MODELS TH21-1 TH21-3 XX23C02 A 24 48 60 B 30 30 36 C 5.5 5.5 5.5 Note: All dimensions & specifications are approximate and subject to change without notice. For any questions or queries regarding our products, please contact our support team- customerservice@tunuo.net or call (909)9907895 Visit our website for more information https://tunuo.