Operation Manual

ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION
13 14
ICS-2000 OCTOPUS CONTROL STATION
K
To change the color of a ZigBee bulb press on the color circle to open the color palette (Only for
RGB or Cold/Warm bulb)
L
Choose the desired color.
M
Press the BACK button to go back to the room.
K
L
M
14
2.3 Connect a ZigBee remote
2.3
A
B
First reset your ZYCT-202 ZigBee remote before you connect it to the ICS-2000. (Check the manual of
the ZigBee remote on how to reset it). Keep the remote within 2 meters from the ICS-2000.
A
Add a new device (See chapter 2.2) and choose for ZigBee Remote control
B
Press CONNECT in the App and wait for confirmation from the App
C
Press and hold the Smart Group button on the remote and wait untill the LEDs under the channels start
to blink. Wait for confirmation from the App that the connection succeeded.
Arm
5
C