Specification

■■ Model #99 E-Z
One angle valve and supply cover
__________________
■■ Model #100 E-Z
One P-trap cover
________________ _
■■ Model #400W *
One P-trap cover
________________ _
■■ Model #101 E-Z
One P-trap cover, one angle
valve cover
________________ _
■■ Model #401W *
One P-trap cover, one angle
valve cover
General Description:
LAV GUARD
®
2 E-Z Series waste and supply piping
covers satisfy ADA compliance requirements. Built-in
E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit
trimming feature allow for fast installation without tools.
Series #100 E-Z kits are designed to fit on all tubular
and cast brass P-trap assemblies. Series #400 kits
are the “original” LAV GUARD design and fit schedule 40
ABS and PVC P-trap assemblies — regardless of their
geometry or rotational offset. Valve cover completely
encloses angle valve and supply tube for both handled
and keyed type water stops.
____________________________________________
Material Molded vinyl
____________________________________________
Nominal Wall 1/8" constant
____________________________________________
Durometer 70 -80 - Shore A
____________________________________________
UV Protection Will not fade or discolor
____________________________________________
Durability Virtually indestructible
____________________________________________
Trimming (E-Z Series) Internal,
E-Z Tear-To-Fit
trim feature
____________________________________________
Fasteners (E-Z Series) Internal
E-Z Grip fasteners
(reusable)
____________________________________________
Color China white
____________________________________________
Paintability Apply Latex paint
____________________________________________
Burning Characteristics Self extinguished
ASTM D-635 0 sec (ATB) 0 mm (AEB)
____________________________________________
Bacteria/Fungus ASTM G21 and G22/
Resistance Result: 0 growth
____________________________________________
Maintenance Use common detergents
____________________________________________
Submittal Sheet
ADA-compliant undersink protection
TRUEBRO reserves the right to make product and material changes at any time without notice. 2 / 07
IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017
[phone] [phone] FAX: [phone]
e-mail: [e-mail] Internet: http://www.truebro.com
Job/Location ________________________________________
Designer _________________________________________
■■ Model #102 E-Z
One P-trap cover, two angle valves
and covers
___________________
■■ Model #402W *
One P-trap cover, two angle valves
and covers
___________________
■■ Model #103 E-Z
One P-trap cover, two angle valves
and supply covers, one 5" offset
tailpiece wheelchair strainer cover
___________________
■■
Accessory #105 E-Z
One 5" offset tailpiece wheelchair
strainer assembly
#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies.
#400W * Series (original design) for schedule 40 P-trap assemblies.
Manufactured under one or more of the following U.S. or Canadian patents.
Other patents pending.
5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412
5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083
10" waste arm cover with internal
E-Z Tear-To-Fit trim feature
9" supply
tube cover
with internal
E-Z Tear-To-Fit
trim grooves
J-bend covers
all tubular and cast brass
configurations
Internal ribs add cushioning
and thermal resistance
10" tailpiece
cover
E-Z Tear-To-Fit trim grooves
E-Z Grip
internal
fasteners
Vent hole keeps P-trap dry
Vent slots keep
valve dry
Install over
pipes. Press finger
recesses to engage
internal fasteners.
To remove covers,
firmly pull seam
apart using a
strong grip.
Tear-to-fit on
internal
dimensioned
tear lines.
■■ Accessory #105-K
Kohler 6" offset
____________________
■■ Accessory #106 E-Z
One basket strainer cover and offset
waste cover (adjustable to 18")
____________________
■■ Accessory #107 E-Z
Two basket strainer covers and center
or end outlet waste cover (adjustable)
____________________
■■ Accessory #Ex 99 E-Z
One 16" extension for water supply
____________________
■■ Accessory #Ex100 E-Z
One 16" extension for drain waste
arm or tailpiece
Center Outlet
Accessory
106 E-Z
End Outlet
Accessory 107 E-Z
(Configuration Options Shown)
Accessory
105 E-Z
Shown with Accessory #105 E-Z (fits all standard 5" offset
wheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Z
can be purchased separately.
NOTE: Accessory #105 E-Z is included in #103 E-Z kits.
E-Z
Series
Shown
*All #400W series items are the “original” LAV GUARD
®
design and
construction. Specifications may change without notice.
Lav Guard2 Sbmttl 2-07 2/7/07 2:22 PM Page 1