Datasheet

7. Performance specification :
Resistance change rate is 4.24 Temporary resistance change after 240 hours
Humidity
± 5% (3.0% + 0.1Ө) Max.
exposure in a humidity test chamber controlled at
± 1% (0.5% + 0.1Ө) Max.
40±2°C and 90-95% relative humidity
7.9 Resistance change after 1,000 hours
Load life in Resistance change rate is (1.5 hours "on", 0.5 hour "off" ) at RCWV
humidity
± 5% (3.0% + 0.1Ө) Max.
in a humidity chamber controlled at
± 1% (1.0% + 0.1Ө) Max.
40͠ ± 2͠ and 90 to 95 % relative humidity
Resistance change rate is 4.25.1 Permanent resistance change after 1,000 hours
Load Life
± 5% (3.0% + 0.1Ө) Max.
operating at RCWV, with duty cycle of
± 1% (1.0% + 0.1Ө) Max.
(1.5 hours"on", 0.5 hour"off") at 70͠ ± 2͠ ambient
Terminal Resistance change rate is 4.33 Twist of Test Board :
bending ± (1.0% + 0.05ȍ) Max. Y/X = 3/90 mm for 60 seconds
High Power Thick Film Chip Resistors
Characteristics Limits
Test Methods
( JIS C 5201-1 )
Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau
Datasheet
V1_0717_01_en
8