Datasheet

6. Marking :
6.1 Resistors
A. ± 5% Tolerance 0603, 0805, 1206 : the first two digits are significant figures of
resistance and the third onedenoted number of zeros.
Ex. 33KӨ
B. For ohmic values below 10 Ө
Ex. 2.2Ө
C. For E-96 series [±1% (F) tolerance] in 0603 size 3 digit system (due to space restrictions)
please refer to page 8 for coding formula
Ex. 10.2KӨ
D. ±1% Tolerance 0805, 1206 : 4 Digits, the first three digits are singnificant figures of
resistance and the fourth digit denoted number of zeros.Letter"R" is for decimal point.
Ex.
2.7KӨ
6.2 Labels
Label shall be marked with the following item :
Label shall be marked with the following item :
A. Nominal Resistance and Resistance Tolerance
B. Power Rating and Size
C. Quantity
D. Part No.
E. P.O.No.
RESISTANCE:
10
ȍ
± 5 %
F. Lot No.
WATTAGE: 1/2W
SIZE:
HP06
QUANTITY:
PCS
Pb-Free
Ex.
PART NO.:
P.O.NO.:
LOT NO. : 825723
HP06W2J0100T5E
Remark : For 1206 ± 5 % : Label is 10E, value is 10Ө, marking is 100
02C
High Power Thick Film Chip Resistors
333
2R2
5,000
CHIP RESISTOR
2701
Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau
Datasheet
V1_0717_01_en
4