Datasheet

Resistance change after continuous
5 cycles for duty shown below:
Temperature
Step Temperature Time
cycling 1
-55℃ ±3℃
30 mins
Resistance change rate is
± (1% + 0.05Ω) Max. with no
evidence of mechanical damage. 2 Room temp.
10～15 mins
3
+155℃ ±2℃
30 mins
4 Room temp.
10～15 mins
(Sub-clause 4.19)
Vibration Resistance change rate is
± (1% + 0.05Ω) Max.
55Hz, 3 planes 2hrs each
Total amplitude = 1.5mm
(Sub-clause 4.22)
Load life in
Resistance value
△R/R
humidity Normal <100K ± 3 %
Type 100K ± 5 %
Resistance change after 1,000 hours
operating at RCWV with duty cycle of
(1.5 hours "on", 0.5 hour "off") in a humidity
test chamber controlled at 40 ℃ ± 2 ℃
and 90 to 95 % relative humidity
(Sub-clause 4.24.2.1)
Resistance value
△R/R
Load life Normal <56K ± 2 %
Type 56K ± 3 %
Permanent resistance change after
1,000 hours operating at RCWV with duty
cycle of ( 1.5 hours "on", 0.5 hour "off" ) at
70℃ ± 2℃ ambient
(Sub-clause 4.25.1)
Resistance to
solvent
No deterioration of protective
coatings and markings
Specimens shall be immersed in a bath of
trichroethane completely for 3 minutes with
ultrasonic
(Sub-clause 4.30)
Carbon Film Fixed Resistors
Characteristics Limits
Test Methods
( JIS C 5201-1 )
Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau
Datasheet
V1_0717_01_en
6