Owner's Manual

Se rvice
7
15
WARNING: Unplug the snow thrower and remove
the key to avoid unintended starting before
servicing the snow thrower.
Replacing Skid Plate
1. Remove the three screws securing the skid plate to the
auger housing. See Figure 7-1.
Side View
Figure 7-1
2. Remove the worn skid plate and replace with a factory
approved skid plate.
3. Secure using the three screws removed earlier.
Replacing Auger Belt
1. Unscrew the six screws securing the belt cover to the auger
housing and remove the belt cover. See Figure 7-2.
Figure 7-2
2. Pull the idler bracket upward to relieve tension on the belt.
See Figure 7-3
CAUTION: Do not unhook the idler extension
spring. Doing so may allow the spring to become
dislodged and lost in the auger housing.
Pulley A
Idler Bracket
Pulley B
Figure 7-3