Thank you for choosing our 3D printer. Please read this User Manual carefully and thoroughly before operating the printer for the first time. Please take good care of this User Manual.
List of parts Main body 1 User Manual Power Cord & Adapter Printing platform Paper funnel FEP film USB Resin Vat.
General Specifications Technology Operating Temperature Relative Humidity Storage Temperature Supported Materials properties Layer Thickness Printing Speed Product Dimensions Package Dimensions Build Volume Resolution X/Y Resolution Build Volume Resolution X/Y Resolution LCD Vat Photopolymerisation 10℃～30℃ 30%～90% 0℃～30℃ Photosensitive resin 0.025mm/0.05mm/0.075mm/0.
Overview Platform cantilever Printing platform Resin Vat.
Menu Operation 1. Main menu Print 2.1 Settings 1 Settings WIFI Move Z Previous Z=0 2.2 Settings 2 Stop Return 3.
Menu Operation 3.2 Select the file 3.3 Start delete Cancel Return Settings Pause Start 5.1 Move 4.
Menu Operation 5.2 Set Z=0 Cancel 6. Clean the Vat. 7. Exposure test Confirm Return 8. Language 9.
Setup Manual Take out the printer, connect power cord to the printer and turn it on, as shown in fig. (1) ; Fig. (1) Power switch Power slot Click on the touch screen - , select <10mm> step size and click to rise the Z axis. Check and keep the LCD screen and the platform clean and free of debris, as shown in fig. (2) ; 10mm 1 2 Fig. (2) Loosen the fixing knob and the fastening screws on the printing platform so the platform can be rotated freely.
Click < HOME > Setup Manual , wait for the Z axis to descend and then it will stop automatically, as shown in fig. (4) ＆ (5) ; 10mm Fig. (4) Fig. (5) After the Z-axis descends and stops, gently press on top of the platform with your hand, to let it fit evenly on the 2K LCD screen and ensure that the printing platform is parallel to the LCD screen. Then fix the fastening screws as tight as possible, as shown in fig. (6) ; Fig.
Setup Manual Re-raise the platform, and the level rises about 120mm, click on the touch screen to Setting 1, click to enter Settings 2, then click - to check whether the light source is working normally, as shown in fig. (7) ; The screen should display the same as the figure below and the image indicates that the UV lights work perfectly, as shown in fig. (8) ; Click here to change the exposure time. Fig. (7) Fig. (8) Before putting the resin Vat.
Import config file into Lychee Slicer Method 1: In Lychee slicer, click <3D Printer> to enter < Printers and resins >, click or + , select KG406 Pro Max in the alternative models, the config file (*.lyp) will automatically match it . Method 2: The config file (*.lyp) of this printer is stored in the attached USB, which can be imported into the slicing software Lychee to simplify the slicing software settings, thereby facilitating slicing and printing.
Import config file into CHITUBOX Slicer The config file (*.cfg) of this printer is stored in the attached USB, which can be imported into the CHITUBOX slicer to simplify the slicing software settings, thereby facilitating slicing and printing. In CHITUBOX slicer, click , click to enter, click , and select the config file (*.cfg) of the printer.
Slicing software operation This product is attached with "Slicing Software Operation Instructions", which is stored in the attached USB. At the same time, users can download through the network. The download address is: www.tronhoo3d.
F.A.Q. How to transfer model files over WiFi connection? Select the in Settings 1, find the available LAN in the available network and enter the password, the printer will automatically obtain an IP address and display it on the touch screen, the user can log in to the IP address through the computer browser for transmission (note that : Make sure that the computer and the 3D printer are in the same WiFi environment) TronHoo 192.168.132.
Use Instruction Always follow the use instruction during assembly and usage, to avoid any unnecessary damage to the 3D printer or individual injury. After receiving the 3D printer, please check the packing parts first. If any parts are missing or damaged (non-human damage), please contact after-sales service within 3 days to reissue. (If you do not contact after-sales service within the specified time, the possible costs will be borne by the customer.
Notice For continue product improvement, all the contents in this manual is subject to change without notice. All the contents in user manual are provided for reference only. Actual product features and specifications (including but not limited to appearance, color and size), as well as actual display contents (including but not limited to backgrounds, UI and screen snaps) may vary, and should be subject to actual product.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B d igital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
