User's Manual
Page 27
E Series Ethernet Radio – User Manual
Version 08-10
Part E – Getting Started - ER45e
Part E – Getting Started
ER45e Quick Start Guide
Introduction
Welcome to the Quick Start Guide for the ER45e Ethernet
Radio. This guide provides step-by-step instructions, with simple
explanations to get you up-and-running.
Mounting and Environmental
Considerations
The ER45e radio comes complete with a mounting cradle and is
attached to a panel or tray by means of screws or bolts, using the
hole slots provided.
Note: In high power or high temperature applications, it is desirable
to mount the radio with the heatsink uppermost to allow ventilation
for the heatsink.
The radio should be mounted in a clean and dry location,
protected from water, excessive dust, corrosive fumes, extremes
of temperature and direct sunlight. Please allow sufcient passive
or active ventilation to allow the radio modem’s heatsink to operate
efciently.
Warning: Where an ER45e is to be operated between 45°C and
60°C ambient, it must be installed in a restricted access location.
Typical Radio Setup
ER45e Connections Layout