OWNER’S MANUAL TRINITY 2-TIER SLIDING WIRE DRAWER Model # TBFC-2206/22062 (2-pack)
PARTS LIST Your TRINITY 2-Tier Sliding Wire Drawer should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at our customer center at www.trinityii.com. You will need a Phillips screwdriver for assembly. A rubber mallet is also recommended.
INSTALLATION INSTRUCTIONS – In Cabinet STEP 1 Place CABINET MOUNTING TEMPLATE (G) inside your cabinet. Using a pencil, mark the location where you plan to install the CABINET SCREWS (F). G (1) • Note: To ease the installation you can pre-drill small holes at the marked locations. STEP 2 Identify LEFT & RIGHT SLIDES (B) & (C). • Note that the BACK end of each SLIDE (B) & (C) has a black tip and the FRONT end does NOT.
INSTALLATION INSTRUCTIONS – In Cabinet STEP 3 Align WIRE DRAWER (A) at the marked location and push it into the clips of the LEFT & RIGHT SLIDES (B) & (C). A (1) Installation Suggestion: With the WIRE DRAWER (A) resting on top of the clips, brace the top of the WIRE DRAWER (A) with one hand and, with a rubber mallet, lightly tap each bottom corner of the WIRE DRAWER (A) to secure the WIRE DRAWER (A) into the clips. STEP 4 Remove the black caps from the 4 corner posts of the bottom basket.
INSTALLATION INSTRUCTIONS – On Wire Rack STEP 1 Identify LEFT & RIGHT SLIDES (B) & (C). • Note that the BACK end of each SLIDE (B) & (C) has a black tip and the FRONT end does NOT. Place SLIDES (B) & (C) on desired wire shelf. Make sure the FRONT of the SLIDES (B) & (C) is lined up with the FRONT of the shelf. B (1) C (1) Line up the slides along the wires in the wire shelf to ensure they are straight. Make sure the front edge of the WIRE DRAWER (A) lines up to the edge of the shelf so they are flush.
INSTALLATION INSTRUCTIONS – On Wire Rack STEP 3 With a Phillips screwdriver, secure the SLIDES (B) & (C) to the wire shelf by putting PLATE SCREWS (E) through the slots and fasten to the RACK PLATES (D). D (4) E (4) STEP 4 Attach the WIRE DRAWER (A) to the clips in the LEFT and RIGHT SLIDES (B) & (C) until it clicks into the clip.
INSTALLATION INSTRUCTIONS – On Wire Rack STEP 5 Remove the black caps from the 4 corner posts of the bottom basket. Insert the 4 CONNECTORS (H) into the posts of the bottom basket. Place the top basket on the connectors. © 2018 TRINITY - 800.985.
SERVICE PARTS LIST – TBFC-2206 / TBFC-22062 TRINITY Customer Service provides the following replacement parts: Part Number Description 1) CSV-21-001-1118 Wire Drawer 2) CSV-04-001-0875 Connector 3) ZSV-12-003-1575 Right Slide 4) ZSV-01-003-0420 Cabinet Screw 5) XWH-96-001-0001 Template 6) ZSV-01-004-0410 Plate Screw 7) ZSV-01-005-0428 Rack Plate 8) ZSV-12-004-1575 Left Slide 9) XBK-23-002-1210 Plastic Cap 1 9 2 8 3 7 7 4 6 5 © 2018 TRINITY - 800.985.
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY 2-Tier Sliding Wire Drawer. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY TRINITY 2-Tier Sliding Wire Drawer Model # TBFC-2206/22062 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY 2-Tier Sliding Wire Drawer (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.