Product Brochure

L-Shape
The L-Shape trim features a slightly sloped vertical
wall or rail that provides a decorative nish while
protecting bordering tiles. Designed with integrated
“Straight Edge Grout Line™” to create a consistent
straight grout line between the tile and the nished
trim to complete your project. It is available in either aluminum or rigid PVC.
U-Shape Reducer
Creates a smooth transition from tiled surfaces to
oor coverings at lower elevations. Prole is designed
to provide a gentle slope down from the edge of
the tile to the lower oor. It features the integrated
“Straight Edge Grout Line™” to create a consistent
straight grout line between the tile and the nished trim to complete your
project. Available in a variety of anodized aluminum nishes.
T-Shape
T-Shape seam binder is used to cover oors of similar
heights between tile and oor coverings at lower
elevations such as linoleum, vinyl or nished concrete.
It installs easily between existing joints and overlaps
both edges to protect the oor.
R-Shape Bullnose
The R-Shape Bullnose forms an attractive round outer
corner along the edge of the surface on counters and
walls. Designed with integrated “Straight Edge Grout
Line™” to create a straight grout space between the
tile and the trim. It is available in a variety of nishes
in both anodized aluminum and rigid PVC plastic.
RS-Shape
Round Edge Step prole is designed for nishing
and protecting edges on ceramic and stone
installations on counters and stairs. The trim edge is
a symmetrical round shape that matches the regular
R-Shape Bullnose trim. It is suitable for all residential
applications of counter tops and light trac stairs. The patented “Straight
Edge Grout Line™” creates a straight line and space between the tile and
trim. Available in a variety of anodized aluminum nishes.
Q-Shape
The Q or Square Shape trim forms a square outer
corner along the surface edge. It’s great for transitions,
corners, and other oor applications that transition
from tile to carpet, parquet, or natural stone. Designed
with integrated “Straight Edge Grout Line™” to create
a straight grout line between the tile and the nished trim.
Product and Installation Guide
Installation for all Profiles Except T Installation for T-Shape Profile
Maintenance and Cleaning Guide
Trim Master products are designed for years of maintenance free service and
do not require any special maintenance. Clean them regularly using common
household cleaning agents. Do not use cleaning agents with hydrochloric
and hydrouoric acid. Abrasive cleaners should not be used on anodized
aluminum as they may scratch the surface. Remove any grout, mortar or thin
set from the surface immediately after installation.
1. Select shape according to width of the gap or joint to be covered.
2. Make sure the gap is clean and free from obstruction that would
hinder the shape from setting level on the tile or ooring material.
3. Caulk the joint with a silicone or elastomeric caulk being careful not to
overll the joint.
4. Insert the anchoring leg into the gap so the edges of the prole rest on
the edges of the ooring material and covering the gap. The anchor
leg should be partially buried in the sealant.
5. Gently position the prole so it is straight.
6. Immediately remove any excess sealant and let sealant cure according
to manufacturer’s directions.
1. Choose shape and prole according to tile thickness.
2. Apply thin set mortar according to manufacturer’s directions to the area
where prole is to be placed, using the appropriate size U notch trowel.
2a. For edging and outside wall corners using L-Shape or R-Round
Bullnose, nish tiling one wall rst, then trowel thin set mortar
over corner areas of second wall.
2b. For the U-Shape Reducer, ll the hollow space beneath the
sloped section of prole with thin set mortar before setting the
trim.
3. Press the perforated anchoring leg of the prole into the mortar until
mortar lls the circle cutouts. Then align trim with tile edge making sure
the tile is ush against lower edge of trim face to ensure a uniform grout
joint space between trim and tile.
4. Trowel additional thin set mortar evenly over the perforated anchoring
leg completely covering the circle cutouts to ensure full coverage and
support of the tile edges. The anchor leg should be partially buried in
the sealant.
5. Ensure the tile is ush with top of prole or slightly lower. The prole
should not be higher than the tiled surface, but rather up to approx.
1/32” (1 mm) lower.
6. After the tiles and prole have set, ll the grout joint completely with
grout.
7. Gently wipe o any excess grout or thin set mortar immediately.
Exposed edges of ceramic and stone tiles can chip or crack if left unprotected. Professional prole trims are designed for oors, walls and countertops.
They protect thresholds, oor transitions and other edges while providing an attractive and decorative accent to any project. The trims feature patent
pending protected designs including new “Straight Edge Grout Line” for a professional nished look.
Floor and Wall Proles
Patented design with “Straight Edge Grout Line™”
Finish and edge protection for corners and edges of tiled surfaces. Available in a wide range of premium nishes.
Tile Trim Solutions
Floor Transitions • Walls & Counters • Protects Tile Edges
Additional proles and nishes available at HomeDepot.com
TileTrimSolutions.com