Installation Guide

C
D1
D
E
B
L
F
M
A
G
B
M L
3. F E
4.
2.
OR
GREEN GROUND
FROM SUPPLY
GROUND WIRE
BARE, OR GREEN
SCREW
UL LISTED
WIRE NUTS
WHITE OR IDENTIFIED
FIXTURE WIRE
BARE, OR GREEN
FIXTURE GROUND
FIXTURE WIRE
PLAIN OR BLACKBLACK SUPPLY
FROM SUPPLY
GROUND WIRE
BARE, OR GREEN
WIRE
WIRE
WHITE SUPPLY
WIRE
O
VERDE O NEUTRO
DEL SUMINISTRO
ALAMBRE DE TIERRA
TIERRA VERDE
TORNILLO DE
ALAMBRE DEL
DEL SUMINISTRO
VERDE O NEUTRO
ALAMBRE DE TIERRA
SUMINSTRO NEGRO
ALAMBRE DEL
ALAMBRE NEGRO
DE LA LAMPARA
VERDE O NEUTRO
O NEUTRO
ALAMBRE DE TIERRA
DE LA LAMPARA
O IDENTIFICADO
UL CALIFICADO
CONECTADOR
DE LA LAMPARA
ALAMBRE BLANCO
Assembly Steps:
QTYPart Description
Code
0
Mounting Screws
2
2
Part Included
Canopy Screw
A
D
F
Junction Box
5.
H
1
3
Ball Nut
Canopy
G
H
J
L
A
C D11.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
Pendant Light SKU# TH-SF0141
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Assembly Instructions
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE
PRODUCT AND THE HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: Product may not look exactly as shown in figures.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
This fixture has been rated for up to 40-watt maximum TYPE B bulbs or 9-watt compact fluorescent light bulbs or 4-watt LED bulbs . To avoid the risk of fire, do not exceed the recommended wattage.
This product is safety listed for dry locations.
This product may be dimmed with a standard incandescent dimmer.
Problem Possible Cause Solution
The bulb will not light.
The power is OFF. Ensure the power supply is ON.
There is a faulty wire connection. Check the wiring.
The circuit breaker is OFF.
Ensure the circuit breaker is in the ON position.
The fuse blows or circuit
breaker trips when the light
is turned ON.
There are crossed wires or the
power wire is grounding out.
Check the wire connections.
Contact a qualified electrician.
Hardware included
B 4
D1 3
Wire Nuts
G
J
1
Fixture Wire
Socket
Mounting Bracket
C
E
Bulb
SHADE
0M
Leading Wire
1
1
0
D
G
Trouble Shooting
H
J