Instructions / Assembly

9/27/2012

DescriptionQty.

Model: TXA15

Assembly Instructions

TOOLS NEEDED

ALL HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED

__(1) Hardware pack

__(1) Seat

__(1) Back

__(2) Front legs

__(2) Arms

__(1) Long brace

__(1) Short brace

C-1/4-20 X 2-1/4 WAFER SHCS

B-1/4-20 X 1-7/8 WAFER SHCS

A-.27 X 2 SOCKET WAFER A

short brace

Step 4

Attach short brace to rear leg

using (2) 2" screws

Step 3

Attach back to seat

using (2) 2" screws

Attach back to arm

Attach arms to front leg using

Step 2

(2) 2-1/4" screws

D,E

long brace

Attach front legs to seat

using (6) 1-7/8" screws

Attach long brace

front

using (2) 2" screws

Step 1

wing faces

D,E

E-1/4-20 NYLOCK NUT

D-1/4 FLAT WASHER

4MM T-HANDLE HEX KEY

(INCLUDED)

PAGE 1
Step 1 Attach front legs to seat using (6) 1-7/8" screws Assembly Instructions Model: TXA15 __(1) Seat __(1) Back __(2) Front legs __(2) Arms __(1) Long brace __(1) Short brace __(1) Hardware pack Step 2 Attach arms to front leg using (2) 2-1/4" screws Attach long brace using (2) 2" screws wing faces front D,E C B TOOLS NEEDED D,E B A 4MM T-HANDLE HEX KEY (INCLUDED) A long brace Qty. Description Step 3 Attach back to seat using (2) 2" screws A-.
PAGE 2
Assembly Instructions Models: TXRT236, TXRCT236 TXRRT236, TXRBT236 __(1) Table top __(4) Leg __(2) Foot __(2) Brace __(1) Umbrella Brace __(1) Hardware pack Step 1 Attach feet to legs using (4) 2 1/2" Chair bolts (fine thread) Step 2 Lay the table top on a flat surface. Attach the leg assemblies to the table top using (8) 2 1/2" screws. B TOOLS NEEDED C C 4MM T-HANDLE HEX KEY (INCLUDED) 4mm HEX KEY: INCLUDED Qty.