User guide

6
SB 8350TV
ENGLISH
VOLUME CONTROL AND MUTE FUNCTION
Volumecanbeadjustedusingthevolumecontrolkeys(3onthedevice,6ontheremotecontrol)
1. Pressthe+keytoincreasethevolumeofthedevice.
2. Pressthe-buttontodecreasethevolume.
Note:
If the device is connected to the phone outlet of a TV or of a device equipped with speakers, these are usually deactivated. To achieve a good
output signal, adjust the volume to the maximum using the TV controls (or the controls of the device).
If the Sound Bar is connected to the audio-scart output of a TV (or any other audio output different from the phone output of another device)
the audio output level is steady and cannot be adjusted using the TV controls (or the device controls). The speakers of the TV (or of the device)
are not deactivated and to mute them it is necessary to lower the volume completely. Otherwise, the speakers can be adjusted to playback
the audio signal together with the Sound Bar.
MUTE function:UsetheMUTEkey(5)ontheremotecontroltoactivatetheaudioofffunction.ToactivatetheaudioagainpresstheMUTEkeyagain.
Warning:
- Some audio output to which the Sound Bar may be connected (such as the phone output) might have their own volume controls. Make
sure that the audio output level is properly adjusted on the source device otherwise the output volume of the Sound Bar, even if set to the
maximum, will be low.
- If during the playback the sound coming from the Sound Bar is distorted, this means that the input signal is too high. Lower the volume of
the Sound Bar or lower the audio output level on the source device.
- If the Sound Bar is connected to a TV through the phone output, it might happen that the sound is low even if the volume is set to the maxi-
mum. In this case, try to connect the Sound Bar to the audio-scart output using the supplied adapter.
To the LINE IN
input (5) of the
Sound Bar
To the scart output of the TV using
the appropriate Scart Tv Audio
Out adapter
To the phone
output of the TV
RS BASS FUNCTION
TheRSBASSfunctionallowstochangethesounddynamicsoftheSoundBargivingtheimpressionofafullall-roundentertainment.
1. PresstheRS-BASSkey(7)ontheremotecontroltoactivatetheRSBassfunction.
2. PresstheRS-BASSkey(7)ontheremotecontrolagaintodeactivatetheRSBassfunction.
REMOTE CONTROL SELF-LEARNING FUNCTION
ThisfunctionallowstouseonlyoneremotecontroltocontrolboththeSoundBarandthedevicetowhichitisconnected,usuallyaTV.Theremote
controlisabletoself-learnandstoreupto7controlstocontrolthebasicfunctionsofotherdevices.
Theself-learningkeyhavebeenassociatedwiththenamesofthemostcommonfunctionsofastandardTVtomakethisoperationeasierforthe
user:TVCH(changechannel),TVVOL(volumeadjustment),ON/OFFkey,inputselectionkey,ENTERkey(confirmation).Anyway,itispossibleto
associatethesekeyswithanyfunctionavailableontheremotecontrolofanydevice.
CONNECTING TO THE POWER SUPPLY
FittheplugintoanAC220V-50Hzsocket.Donotplugtheappliancetodifferentpower.
Unless otherwise specified, the controls description applies to both the appliance and the remote control.
POWER ON/ STANDBY AND AUTO POWER FUNCTION
1. Pressthepower-on/standbyON/OFFkey(1)toswitchonthedevice.
2. Pressthepower-on/standbyON/OFFkey(1)againtoswitchthedevicebacktostandbymode.
ThisdeviceisequippedwithanAutoPowerOn/OfffunctionthatautomaticallyturnsontheSoundBarwhenitdetectsan
audiosignalononeoftheinputsandautomaticallyturnsitoffifnoinputsignalisdetectedformorethanoneminute.
Note: If the Sound Bar does not react to any operation or does not work properly, disconnect the power cable
for 30 seconds to reset the device.